Ethernet
Ethernet copied to clipboard
arduino-libraries
Ethernet Library for Arduino
I've been experiencing a bug using the Arduino to communicate over ethernet when using multiple EthernetClients, and as far as I can tell this line is the culprit. The exact...
There is absolutely no point of keeping a static hostname prefix as this library is free and open source. There are already made patches for allowing customization of DHCP hostname...
Hi, FYI there is a problem of compatibility with the compiler 1.8.8 on megaAVR board. I use a W5500 chipset with a nano every, everything was working fine on the...
### Hardware * Arduino Uno (any rev.) * Genuine Arduino Ethernet Shield Rev 2, equipped with PoE receiver module ### Problem Chip type detection such as `W5100Class::isW5100()` `W5100Class::isW5500()` and so...
Dear, The library supports W5100 chip but not W5100S installed in W5100S-EVB-Pico. This library based on the official library supports the chip: https://github.com/WIZnet-ArduinoEthernet/Ethernet It is only necessary to add less...
[WIZnet](https://wizwiki.net/wiki/doku.php?id=start) has launched a new chip [W5100S](https://wizwiki.net/wiki/doku.php?id=products:w5100s:start). And W5100S Ethernetshiled is developing for ARDUINO. You can see the sheet of comparison between W5100 on [WIZwiki >Products >iEthernet >W5100S >Comparison Sheet](https://docs.wiznet.io/Product/iEthernet/W5100S/comparison-sheet).
Support for the following devices was added to the WIZnet fork: - W5100S - W6100
Hi, Testing new SAMD51 (M4) based boards from Adafruit (Metro M4 and Grand Central M4, both based on the SAMD51)... using same simple chat server example. Does not communicate with...
This pull request resolves #139 (`setSS` on ESP8266) and resolves #141 (`EthernetClient::write`).
- Fix issue #140 redefining registry and using the correct ones - Add support for industruino D21G ethernet module (max speed 4mhz) - Fix issue #105 adding icmp ping support...
