Add compatibility to arduino DUE

[NitrofMtl]

Add Macro to be compatible to arduino DUE:

-using USART instead of hardwareSerial -using UARTClass::UARTModes instead of uint16_t for config parameter -changing SERIAL_PORT_HARDWARE to SERIAL_PORT_HARDWARE_DEFAULT to avoid redefinition

Also, while testing, I found that a null byte was added when transmitter was switching from transmit to receive. The problem seem to be related to timing and setting the transmitter to 8 Serial clock fix it.

RS485.setDelays(50, (1000000/BAUDRATE*8));

Future test: try to add RS485 mode of the SAM3X8E

[CLAassistant]

All committers have signed the CLA.

[github-actions[bot]]

Memory usage change @ 1c241d4518331f099b41b8b82f6b0f89dbd4e1fb

Board	flash	%	RAM for global variables	%
arduino:mbed_portenta:envie_m7	N/A	N/A	N/A	N/A
arduino:samd:mkr1000	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrfox1200	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrgsm1400	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrnb1500	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrvidor4000	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwan1300	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwan1310	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwifi1010	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrzero	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:mbed_opta:opta	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0

Click for full report table

Board	examples/RS485Passthrough flash	%	examples/RS485Passthrough RAM for global variables	%	examples/RS485Receiver flash	%	examples/RS485Receiver RAM for global variables	%	examples/RS485Sender flash	%	examples/RS485Sender RAM for global variables	%
arduino:mbed_portenta:envie_m7	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A
arduino:samd:mkr1000	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrfox1200	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrgsm1400	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrnb1500	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrvidor4000	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwan1300	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwan1310	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwifi1010	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrzero	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:mbed_opta:opta	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0

Click for full report CSV

Board,examples/RS485Passthrough<br>flash,%,examples/RS485Passthrough<br>RAM for global variables,%,examples/RS485Receiver<br>flash,%,examples/RS485Receiver<br>RAM for global variables,%,examples/RS485Sender<br>flash,%,examples/RS485Sender<br>RAM for global variables,%
arduino:mbed_portenta:envie_m7,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A
arduino:samd:mkr1000,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrfox1200,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrgsm1400,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrnb1500,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrvidor4000,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrwan1300,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrwan1310,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrwifi1010,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrzero,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:mbed_opta:opta,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0

[NitrofMtl]

UPDATE: RS485 mode did not hold on, but new improvement for those how want to: I made an DMA RS485 library for DUE, and test it with a modified version of Arduino modbus library.