Sebastian Meyer

Great! I hope to get around making a visual part list, but for now you can use my notes: https://gist.github.com/archi/d7581d54f2fa9efc86021854bb2a0637

I created an image with the part values: https://github.com/archi/boards/blob/master/car/v2/parts.png This should make it a bit clearer where to put what, and how MELBUS is connected.

Hey, I used the one I linked above - which is this: https://www.aliexpress.com/item/x/32831000187.html It is a bit wider than yours :( You should check the pin out and see if...

At some point I decided that prototypes will have sockets on everything, so I can measure power/signal prior to frying the IC ;-)

Nice work. Just a small note: The HU-605 should accept the MD-CHGR. At least mine does with my attempt at an emulator (https://github.com/archi/melbus - that code only gets past the...

On the hardware side you could add a relay or a suitable NPN transistor to control the power of the module. Software-wise: The protocol allows for this for sure, but...

@visualapproach Maybe you can patch this in the repo; I think the feature doesn't do any harm if it goes unused.

Seems this requires an update of the bundled libs (or whatever PHP slang) to the upstream versions. At least for e.g. https://github.com/illuminate/database/blob/master/Eloquent/Model.php this is fixed. What I did was essentially:...

I hit the same, seems a lot like what you suggested. Since librespot is not maintained anymore I suppose it's just tough luck :(

Same issue here on a `i7-1185G7` with Arch Linux.