Adrian Blake

This is the error now: Resetting USB to switch back to runtime mode error resetting after download Done!

Here: Start gtkterm try to set to port /dev/ttyACM0 ... it will fail Insert fpga dfu-util -e working You cannot close gtkterm and restart it "no port found /dev/ttyACM0". you...

No,  FOMU  pvt  trying to load eforth Adrian On 13/10/20 7:22 pm, Other Tim wrote: > > Hi @arblake , is this with the > micropython example? > > —...

loaded micropython: Copying data from PC to DFU device Download [=========================] 100% 136164 bytes Download done. state(7) = dfuMANIFEST, status(0) = No error condition is present state(8) = dfuMANIFEST-WAIT-RESET, status(0)...

Ubuntu , latest foboot v2.0.2 udev stuff done

upgraded to foboot v2.0.3 I cannot remove the device and restart micropython. I needs to be reloaded

If I use Rob's j1eforth, gtkterm needs to be started before loading software and I cannot stop gtkterm then restart and expect it to communicate with j1eforth

My suggestion is that when a host device, computer, connected to the fomu hardware, that computer initialises its com. port toggling the tx line causing the fomu hardware to go...