antoinevg
antoinevg
If you're on Linux the issue may be that the device you are trying to proxy has not been set up for access by a non-root account. You can test...
That could be the problem, we've got some issues with Low Speed support that should be fixed in the next Facedancer release. What are your experiences with Full and High...
SanDisk Ultra 16GB USB 3.0: ``` [35343.586852] scsi host6: usb-storage 3-3:1.0 [35344.621308] scsi 6:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [35344.621522] sd 6:0:0:0: Attached scsi generic...
Also: Sandisk 3.2Gen1 BM2209005782w sdddc3
Can you please try to instead plug the device to be proxied into a High-speed USB 2.0 hub that's plugged into the target host?
Fixed in #183 and https://github.com/greatscottgadgets/facedancer/pull/115
IMPORTANT NOTE: USB 3.x devices will enumerate as Super Speed on the host which Cynthion does _not_ support. In order to ensure a succesful proxy devices need to be enumerated...
Generally there are no transfer size limits in Facedancer as it packetizes all transfers _except_ for `CONTROL IN` transfers as this would require some fairly complex state synchronization between the...
Cynthion docs have been updated with instructions: https://cynthion.readthedocs.io/en/latest/developer/introduction.html
This may have been addressed in the release today. Can you please try again with the latest cynthion and facedancer releases: ```sh pip install --upgrade cynthion facedancer cynthion update ```