anselor
anselor
I had the same problem. It was happening with the nightly builds too. This may or may not be related but I noticed that when I export profiles with the...
As a Bambu user, the 2.0.0 release is very broken without the ability to configure the filament in the AMS.
It looks like I'm being forced to become a Bambu Studio user now.
I use the Bambu P1S with AMS. The PRs I submitted a while back were all related to managing custom filament profiles - adding new material types and popular vendor...
> > I only have a P1P printer, neither orca nor bambu studio can see custom filament in my machine. > > Custom filament was selectable with a P1S pre-2.0...
The missing custom filaments appear to show up in the nightly. What a strange thing for them to do.
@RemindZ Depending on how your custom filaments are defined, it could be related to this issue I found https://github.com/SoftFever/OrcaSlicer/issues/5707
@RemindZ Best I can tell, Bambu is actively making changes to break the ability to do this kind of customization. Over the past few months I've had to re-adjust the...
What version are you using?
I've attempted to integrate all of the recent pending PRs into a complete set of all known fixes/improvements here: https://github.com/anselor/ankermake-m5-protocol/tree/exiles I've built a [docker container](https://cdn.discordapp.com/attachments/1109478707787218964/1218063550770053140/ankerctl_exile.tar.gz?ex=66064d15&is=65f3d815&hm=a8f2ee1bdfb231d53c97a21a16633abd1180aa741e531a2dc22f9fdfb5dbdd73) for it if you want...