Andy Henson

Hi @amrikhsn, I haven't experienced this exact problem before, but I have brought up 104x52 res panels so here are some suggestions that may help 1. Use the [Electrodragon shield](https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/)....

Hi @amrikhsn, good on you for following it to this extent, you've clearly put a bunch of time into this!! This is reaching the limits of my knowledge of this...

Hi @arahasya, I made a [post in the discourse forum](https://rpi-rgb-led-matrix.discourse.group/t/curious-has-anyone-implemented-a-cm4-solution/702) about this topic, but I'd yet to come across this thread, where I've noticed you've developed an active 6 board...

Hi @EnBee1981, did you ever manage to get the IC16169 chipset working? I am facing the same problem now. I have tried all combinations (up to the first ~5 variables)...

Hi @EnBee1981, an update: I'm investigating what LED driver chips manufacturers are using in their outdoor, 320mm x 160mm, P4, 80x40, 1/10 scan rate panels. It looks like this panel...

Hi @hannescam, any update on this 5 months later? I am running into the same issue using a pine64 OSQuartz. Would love to use a raspberry pi compute module but...

@ledvinap, did you ever try the proof of concept version for any rockchip CPU?

Hi @Bradyok, curious what the conclusion was with this - did you ever create one? I'm looking to design or buy something exactly like this.

Hi @hzeller and @marcmerlin, I know this thread is from a while ago, but I'm curious, I am now wanting to do the same thing, and was wondering if there...

ha, right after I posted this, I experimented with changing the gpio slowdown, and seemed to have stumbled into a solution! I was previously slowing it down to 3. Then...