Add Visability to more values

[Hosemans]

Is it possible to add the ability to see more vaules in HA. For example the external temperature. This would allow me to switch off the cooling and run in fan only mode if a cool change has come through an the outside temperature is below the set point. Some other information would also be nice to have such as faults and damper status. These could be additional entities if they don't fit under the climate entitie.

Below is what my system shows, I have a heater with 2 dampers to create 3 zones and seperatly evap with external temp sensor on the one controller. The heater and evap use different sets of ducts.

"SystemOn": 1, "MacAddressId": "xxx", "DateKey": 20230101, "TimeKey": 551, "TimeRunning": "2023-01-01 09:11:33.000", "CoolerType": 0, "TouchCount": 10, "ExternalTemp": 33, "InternalTemp": 24, "EvapCRunning": 1, "FanOrTempControl": 1, "PumpStatus": 1, "CFanOnlyOrCool": 0, "NightQuietMode": 0, "PumpOffExternalAirSensor": 1, "DrainExternalSensor": 0, "ManualDrain": 0, "PadFlush": 0, "AutoClean": 0, "DrainDry": 0, "FaultCodePresent": 0, "CFanSpeed": 10, "CTemp": 23, "HumidityActualValue": 0, "Fault": 0, "BasicFault": 0, "Spanner": 0, "HRunning": 0, "HFanOnly": 0, "HFanSpeed": 0, "HActualFanSpeed": 0, "HActualGasRate": 0, "HSetGasRate": 3, "HTemp": 23, "HActualGasRateVariable": 0, "ThermistorTemperature": 37, "HNewFault": 0, "FlameSenseVoltage": 1, "FAOCRunning": 0, "FAOCActualCompressorON": 0, "FAOCTemp": 23, "IAOCRunning": 0, "IAOCCompressorON": 0, "IAOCSetTemp": 23, "IAOCActualTemp": 0, "ProgramMode": 0, "ProgramModeOverridden": 0, "UpdateMicroProcessor": 0, "UpdateWiFiModule": 0, "ClearSoftwareUpdate": 0, "LoggingFrequency": 0, "EnableLiveStreaming": 0, "UpdateInPogress": 0, "UpdateCompleted": 1, "UpdateFailed": 0, "SignalStrength": 39, "OnOffZone1": 1, "DamperOnOffZone1": 1, "ProgramModeZone1": 0, "ProgramModeOverriddenZone1": 0, "SetTempZone1": 23, "ActualTempZone1": 24, "OnOffZone2": 0, "DamperOnOffZone2": 0, "ProgramModeZone2": 0, "ProgramModeOverriddenZone2": 0, "SetTempZone2": 0, "ActualTempZone2": 0, "OnOffZone3": 0, "DamperOnOffZone3": 0, "ProgramModeZone3": 0, "ProgramModeOverriddenZone3": 0, "SetTempZone3": 0, "ActualTempZone3": 0, "OnOffZone4": 0, "DamperOnOffZone4": 0, "ProgramModeZone4": 0, "ProgramModeOverriddenZone4": 0, "SetTempZone4": 0, "ActualTempZone4": 0, "OnOffZone5": 0, "DamperOnOffZone5": 0, "ProgramModeZone5": 0, "ProgramModeOverriddenZone5": 0, "SetTempZone5": 0, "ActualTempZone5": 0, "OnOffZone6": 0, "DamperOnOffZone6": 0, "ProgramModeZone6": 0, "ProgramModeOverriddenZone6": 0, "SetTempZone6": 0, "ActualTempZone6": 0, "OnOffZone7": 0, "DamperOnOffZone7": 0, "ProgramModeZone7": 0, "ProgramModeOverriddenZone7": 0, "SetTempZone7": 0, "ActualTempZone7": 0, "OnOffZone8": 0, "DamperOnOffZone8": 0, "ProgramModeZone8": 0, "ProgramModeOverriddenZone8": 0, "SetTempZone8": 0, "ActualTempZone8": 0, "OnOffZone9": 0, "DamperOnOffZone9": 0, "ProgramModeZone9": 0, "ProgramModeOverriddenZone9": 0, "SetTempZone9": 0, "ActualTempZone9": 0, "OnOffZone10": 0, "DamperOnOffZone10": 0, "ProgramModeZone10": 0, "ProgramModeOverriddenZone10": 0, "SetTempZone10": 0, "ActualTempZone10": 0