cpanpm
cpanpm copied to clipboard
andk
Odd issues with build_requires_install_policy [no]
Freshly perlbrewed perl 5.18.1, stock bundled CPAN.pm 2.0, build_requires_install_policy set to no.
rabbit@Thesaurus:~$ tree perl5/perlbrew/perls/5.18.1/lib/site_perl/
perl5/perlbrew/perls/5.18.1/lib/site_perl/
└── 5.18.1
└── x86_64-linux-thread-multi
2 directories, 0 files
A mere cpan Package::Stash executed as the first command on this new perl fails due to a missing Module::Implementation. Particularly ominous is the line make: *** No targets specified and no makefile found. Stop. even though there is nothing special about M::I's Makefile.PL: https://metacpan.org/source/DROLSKY/Module-Implementation-0.07/Makefile.PL
This could be related (but does not seem to be exactly the same as) https://rt.cpan.org/Ticket/Display.html?id=87474
Full log follows:
rabbit@Thesaurus:~$ cpan Package::Stash
Reading '/home/rabbit/.cpan/Metadata'
Database was generated on Sun, 06 Oct 2013 08:08:54 GMT
Running install for module 'Package::Stash'
Running make for D/DO/DOY/Package-Stash-0.36.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/D/DO/DOY/Package-Stash-0.36.tar.gz ok
---- Unsatisfied dependencies detected during ----
---- DOY/Package-Stash-0.36.tar.gz ----
Dist::CheckConflicts [build_requires]
Running make test
Make had some problems, won't test
Delayed until after prerequisites
Running make install
Make had some problems, won't install
Delayed until after prerequisites
Running install for module 'Dist::CheckConflicts'
Running make for D/DO/DOY/Dist-CheckConflicts-0.09.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/D/DO/DOY/Dist-CheckConflicts-0.09.tar.gz ok
CPAN.pm: Building D/DO/DOY/Dist-CheckConflicts-0.09.tar.gz
Checking if your kit is complete...
Looks good
Warning: prerequisite List::MoreUtils 0.12 not found.
Warning: prerequisite Module::Runtime 0 not found.
Writing Makefile for Dist::CheckConflicts
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- DOY/Dist-CheckConflicts-0.09.tar.gz ----
List::MoreUtils [requires]
Module::Runtime [requires]
Test::Fatal [build_requires]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'List::MoreUtils'
Running make for A/AD/ADAMK/List-MoreUtils-0.33.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/A/AD/ADAMK/List-MoreUtils-0.33.tar.gz ok
CPAN.pm: Building A/AD/ADAMK/List-MoreUtils-0.33.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for List::MoreUtils
Writing MYMETA.yml and MYMETA.json
cp lib/List/MoreUtils.pm blib/lib/List/MoreUtils.pm
/home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/ExtUtils/xsubpp -typemap /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/ExtUtils/typemap MoreUtils.xs > MoreUtils.xsc && mv MoreUtils.xsc MoreUtils.c
cc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.33\" -DXS_VERSION=\"0.33\" -fPIC "-I/home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi/CORE" -DPERL_EXT MoreUtils.c
Running Mkbootstrap for List::MoreUtils ()
chmod 644 MoreUtils.bs
rm -f blib/arch/auto/List/MoreUtils/MoreUtils.so
cc -shared -O2 -L/usr/local/lib -fstack-protector MoreUtils.o -o blib/arch/auto/List/MoreUtils/MoreUtils.so \
\
chmod 755 blib/arch/auto/List/MoreUtils/MoreUtils.so
cp MoreUtils.bs blib/arch/auto/List/MoreUtils/MoreUtils.bs
chmod 644 blib/arch/auto/List/MoreUtils/MoreUtils.bs
Manifying blib/man3/List::MoreUtils.3
ADAMK/List-MoreUtils-0.33.tar.gz
/usr/bin/make -- OK
'YAML' not installed, will not store persistent state
Running make test
PERL_DL_NONLAZY=1 /home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_compile.t .. ok
t/02_perl.t ..... ok
t/03_xs.t ....... ok
All tests successful.
Files=3, Tests=370, 1 wallclock secs ( 0.08 usr 0.02 sys + 0.42 cusr 0.02 csys = 0.54 CPU)
Result: PASS
ADAMK/List-MoreUtils-0.33.tar.gz
/usr/bin/make test -- OK
Running make install
Not installing because is only 'build_requires'
Running install for module 'Module::Runtime'
Running make for Z/ZE/ZEFRAM/Module-Runtime-0.013.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/Z/ZE/ZEFRAM/Module-Runtime-0.013.tar.gz ok
CPAN.pm: Building Z/ZE/ZEFRAM/Module-Runtime-0.013.tar.gz
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'Module-Runtime' version '0.013'
Building Module-Runtime
ZEFRAM/Module-Runtime-0.013.tar.gz
./Build -- OK
Running Build test
t/cmn.t ........... ok
t/dependency.t .... ok
t/import_error.t .. ok
t/ivmn.t .......... ok
t/ivms.t .......... ok
t/mnf.t ........... ok
t/pod_cvg.t ....... skipped: Test::Pod::Coverage not available
t/pod_syn.t ....... skipped: Test::Pod not available
t/rm.t ............ ok
t/taint.t ......... ok
t/um.t ............ ok
t/upo.t ........... ok
All tests successful.
Files=12, Tests=303, 1 wallclock secs ( 0.08 usr 0.02 sys + 0.38 cusr 0.04 csys = 0.52 CPU)
Result: PASS
ZEFRAM/Module-Runtime-0.013.tar.gz
./Build test -- OK
Running Build install
Not installing because is only 'build_requires'
Running install for module 'Test::Fatal'
Running make for R/RJ/RJBS/Test-Fatal-0.013.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/R/RJ/RJBS/Test-Fatal-0.013.tar.gz ok
CPAN.pm: Building R/RJ/RJBS/Test-Fatal-0.013.tar.gz
Checking if your kit is complete...
Looks good
Warning: prerequisite Try::Tiny 0.07 not found.
Writing Makefile for Test::Fatal
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- RJBS/Test-Fatal-0.013.tar.gz ----
Try::Tiny [requires]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'Try::Tiny'
Running make for D/DO/DOY/Try-Tiny-0.18.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/D/DO/DOY/Try-Tiny-0.18.tar.gz ok
CPAN.pm: Building D/DO/DOY/Try-Tiny-0.18.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Try::Tiny
Writing MYMETA.yml and MYMETA.json
cp lib/Try/Tiny.pm blib/lib/Try/Tiny.pm
Manifying blib/man3/Try::Tiny.3
DOY/Try-Tiny-0.18.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ................. ok
t/basic.t ...................... ok
t/context.t .................... ok
t/erroneous_usage.t ............ ok
t/finally.t .................... ok
t/given_when.t ................. ok
t/global_destruction_forked.t .. ok
t/named.t ...................... skipped: Sub::Name required
t/when.t ....................... ok
All tests successful.
Files=9, Tests=96, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.30 cusr 0.02 csys = 0.38 CPU)
Result: PASS
DOY/Try-Tiny-0.18.tar.gz
/usr/bin/make test -- OK
Running make install
Not installing because is only 'build_requires'
Running make for R/RJ/RJBS/Test-Fatal-0.013.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc
CPAN.pm: Building R/RJ/RJBS/Test-Fatal-0.013.tar.gz
cp lib/Test/Fatal.pm blib/lib/Test/Fatal.pm
Manifying blib/man3/Test::Fatal.3
RJBS/Test-Fatal-0.013.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ................ ok
t/000-report-versions-tiny.t .. #
#
# Generated by Dist::Zilla::Plugin::ReportVersions::Tiny v1.09
# perl: 5.018001 (wanted any version) on linux from /home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl
#
# Carp => 1.29 (want any version)
# Exporter => 5.68 (want 5.57)
# ExtUtils::MakeMaker => 6.66 (want 6.30)
# File::Spec => 3.40 (want any version)
# IO::Handle => 1.34 (want any version)
# IPC::Open3 => 1.13 (want any version)
# Test::Builder => 0.98 (want any version)
# Test::Builder::Tester => 1.22 (want any version)
# Test::More => 0.98 (want 0.96)
# Test::Pod => module not found. (want 1.41)
# Try::Tiny => 0.18 (want 0.07)
# overload => 1.22 (want any version)
# strict => 1.07 (want any version)
# version => 0.9902 (want 0.9901)
# warnings => 1.18 (want any version)
#
# Thanks for using my code. I hope it works for you.
# If not, please try and include this output in the bug report.
# That will help me reproduce the issue and solve your problem.
#
t/000-report-versions-tiny.t .. ok
t/basic.t ..................... ok
t/like-exception.t ............ ok
t/todo.t ...................... ok
All tests successful.
Files=5, Tests=17, 1 wallclock secs ( 0.04 usr 0.00 sys + 0.28 cusr 0.02 csys = 0.34 CPU)
Result: PASS
RJBS/Test-Fatal-0.013.tar.gz
/usr/bin/make test -- OK
Running make install
Not installing because is only 'build_requires'
Running make for D/DO/DOY/Dist-CheckConflicts-0.09.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Dist-CheckConflicts-0.09-OLBvZ9
CPAN.pm: Building D/DO/DOY/Dist-CheckConflicts-0.09.tar.gz
cp lib/Dist/CheckConflicts.pm blib/lib/Dist/CheckConflicts.pm
Manifying blib/man3/Dist::CheckConflicts.3
DOY/Dist-CheckConflicts-0.09.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t .. ok
t/also.t ........ ok
t/basic.t ....... ok
t/conflicts.t ... ok
t/dist.t ........ ok
t/merge.t ....... ok
t/runtime.t ..... ok
t/warn.t ........ ok
All tests successful.
Files=8, Tests=57, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.34 cusr 0.04 csys = 0.44 CPU)
Result: PASS
DOY/Dist-CheckConflicts-0.09.tar.gz
/usr/bin/make test -- OK
Running make install
Not installing because is only 'build_requires'
Running make for D/DO/DOY/Package-Stash-0.36.tar.gz
CPAN.pm: Building D/DO/DOY/Package-Stash-0.36.tar.gz
Checking if your kit is complete...
Looks good
Warning: prerequisite Module::Implementation 0.06 not found.
Warning: prerequisite Package::Stash::XS 0.26 not found.
Warning: prerequisite Test::Requires 0 not found.
Writing Makefile for Package::Stash
Writing MYMETA.yml and MYMETA.json
Running make for D/DO/DOY/Dist-CheckConflicts-0.09.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Dist-CheckConflicts-0.09-OLBvZ9
Running make for A/AD/ADAMK/List-MoreUtils-0.33.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/List-MoreUtils-0.33-WiylFZ
Has already been made
Running make test
Has already been tested successfully
Running make install
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi/auto/List/MoreUtils/MoreUtils.so
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi/auto/List/MoreUtils/MoreUtils.bs
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi/List/MoreUtils.pm
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/man/man3/List::MoreUtils.3
Appending installation info to /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi/perllocal.pod
ADAMK/List-MoreUtils-0.33.tar.gz
/usr/bin/make install -- OK
Has already been made
Running make test
Has already been tested successfully
Running make install
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/Dist/CheckConflicts.pm
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/man/man3/Dist::CheckConflicts.3
Appending installation info to /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi/perllocal.pod
DOY/Dist-CheckConflicts-0.09.tar.gz
/usr/bin/make install -- OK
---- Unsatisfied dependencies detected during ----
---- DOY/Package-Stash-0.36.tar.gz ----
Package::Stash::XS [requires]
Test::Requires [build_requires]
Module::Implementation [requires]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'Package::Stash::XS'
Running make for D/DO/DOY/Package-Stash-XS-0.28.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/D/DO/DOY/Package-Stash-XS-0.28.tar.gz ok
CPAN.pm: Building D/DO/DOY/Package-Stash-XS-0.28.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Package::Stash::XS
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- DOY/Package-Stash-XS-0.28.tar.gz ----
Test::Requires [build_requires]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'Test::Requires'
Running make for T/TO/TOKUHIROM/Test-Requires-0.07.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/T/TO/TOKUHIROM/Test-Requires-0.07.tar.gz ok
CPAN.pm: Building T/TO/TOKUHIROM/Test-Requires-0.07.tar.gz
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'Test-Requires' version '0.07'
Merging cpanfile prereqs to MYMETA.yml
Merging cpanfile prereqs to MYMETA.json
Building Test-Requires
TOKUHIROM/Test-Requires-0.07.tar.gz
./Build -- OK
Running Build test
t/00_compile.t ......... 1/1 # Test::More: 0.98
t/00_compile.t ......... ok
t/01_simple.t .......... ok
t/02_no_plan.t ......... ok
t/03_import_hashref.t .. skipped: Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found
t/04_import_array.t .... skipped: Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found
t/05_success.t ......... ok
t/06_perlver.t ......... ok
All tests successful.
Files=7, Tests=15, 0 wallclock secs ( 0.06 usr 0.02 sys + 0.16 cusr 0.04 csys = 0.28 CPU)
Result: PASS
TOKUHIROM/Test-Requires-0.07.tar.gz
./Build test -- OK
Running Build install
Not installing because is only 'build_requires'
Running make for D/DO/DOY/Package-Stash-XS-0.28.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Package-Stash-XS-0.28-PNu9RY
CPAN.pm: Building D/DO/DOY/Package-Stash-XS-0.28.tar.gz
cp lib/Package/Stash/XS.pm blib/lib/Package/Stash/XS.pm
/home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/ExtUtils/xsubpp -typemap /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/ExtUtils/typemap -typemap typemap XS.xs > XS.xsc && mv XS.xsc XS.c
cc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.28\" -DXS_VERSION=\"0.28\" -fPIC "-I/home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi/CORE" XS.c
Running Mkbootstrap for Package::Stash::XS ()
chmod 644 XS.bs
rm -f blib/arch/auto/Package/Stash/XS/XS.so
cc -shared -O2 -L/usr/local/lib -fstack-protector XS.o -o blib/arch/auto/Package/Stash/XS/XS.so \
\
chmod 755 blib/arch/auto/Package/Stash/XS/XS.so
cp XS.bs blib/arch/auto/Package/Stash/XS/XS.bs
chmod 644 blib/arch/auto/Package/Stash/XS/XS.bs
Manifying blib/man3/Package::Stash::XS.3
DOY/Package-Stash-XS-0.28.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ........... ok
t/addsub.t ............... ok
t/anon-basic.t ........... skipped: Test requires module 'Package::Anon' but it's not found
t/anon.t ................. skipped: Test requires module 'Package::Anon' but it's not found
t/bare-anon-basic.t ...... skipped: This isn't really going to work yet, probably
t/bare-anon.t ............ skipped: This isn't really going to work yet, probably
t/basic.t ................ ok
t/compile-time.t ......... ok
t/edge-cases.t ........... ok
t/extension.t ............ ok
t/get.t .................. ok
t/io.t ................... ok
t/isa.t .................. ok
t/magic.t ................ ok
t/paamayim_nekdotayim.t .. ok
t/scalar-values.t ........ ok
t/stash-deletion.t ....... ok
t/synopsis.t ............. ok
t/warnings.t ............. ok
All tests successful.
Files=19, Tests=266, 1 wallclock secs ( 0.10 usr 0.04 sys + 0.62 cusr 0.14 csys = 0.90 CPU)
Result: PASS
DOY/Package-Stash-XS-0.28.tar.gz
/usr/bin/make test -- OK
Running make install
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi/auto/Package/Stash/XS/XS.bs
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi/auto/Package/Stash/XS/XS.so
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi/Package/Stash/XS.pm
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/man/man3/Package::Stash::XS.3
Appending installation info to /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi/perllocal.pod
DOY/Package-Stash-XS-0.28.tar.gz
/usr/bin/make install -- OK
Running install for module 'Test::Requires'
Running Build for T/TO/TOKUHIROM/Test-Requires-0.07.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B
Has already been made
Running Build test
Has already been tested successfully
Running Build install
NO -- is only 'build_requires'
Running install for module 'Module::Implementation'
Running make for D/DR/DROLSKY/Module-Implementation-0.07.tar.gz
Checksum for /home/rabbit/.cpan/sources/authors/id/D/DR/DROLSKY/Module-Implementation-0.07.tar.gz ok
CPAN.pm: Building D/DR/DROLSKY/Module-Implementation-0.07.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Module::Implementation
Writing MYMETA.yml and MYMETA.json
Running Build for Z/ZE/ZEFRAM/Module-Runtime-0.013.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Module-Runtime-0.013-5oFXut
Has already been made
Running Build test
Has already been tested successfully
Running Build install
Building Module-Runtime
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/Module/Runtime.pm
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/man/man3/Module::Runtime.3
ZEFRAM/Module-Runtime-0.013.tar.gz
./Build install -- OK
make: *** No targets specified and no makefile found. Stop.
DROLSKY/Module-Implementation-0.07.tar.gz
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Running make for D/DO/DOY/Package-Stash-0.36.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_
CPAN.pm: Building D/DO/DOY/Package-Stash-0.36.tar.gz
Warning: Prerequisite 'Module::Implementation => 0.06' for 'DOY/Package-Stash-0.36.tar.gz' failed when processing 'DROLSKY/Module-Implementation-0.07.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited.
cp lib/Package/Stash.pm blib/lib/Package/Stash.pm
cp lib/Package/Stash/PP.pm blib/lib/Package/Stash/PP.pm
cp lib/Package/Stash/Conflicts.pm blib/lib/Package/Stash/Conflicts.pm
cp bin/package-stash-conflicts blib/script/package-stash-conflicts
/home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/package-stash-conflicts
Manifying blib/man1/package-stash-conflicts.1
Manifying blib/man3/Package::Stash::PP.3
Manifying blib/man3/Package::Stash.3
Manifying blib/man3/Package::Stash::Conflicts.3
DOY/Package-Stash-0.36.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/rabbit/perl5/perlbrew/perls/5.18.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/impl-selection/*.t
t/00-compile.t ................... Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at lib/Package/Stash.pm line 15.
BEGIN failed--compilation aborted at lib/Package/Stash.pm line 15.
Compilation failed in require at -e line 1.
t/00-compile.t ................... 1/4
# Failed test 'Package::Stash loaded ok'
# at t/00-compile.t line 62.
# ''
# doesn't match '(?^s:^\s*Package::Stash ok)'
# Looks like you failed 1 test of 4.
t/00-compile.t ................... Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(less 1 skipped subtest: 2 okay)
t/addsub.t ....................... Can't locate object method "new" via package "Package::Stash" at t/addsub.t line 12.
t/addsub.t ....................... Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/anon-basic.t ................... skipped: Test requires module 'Package::Anon' but it's not found
t/anon.t ......................... skipped: Test requires module 'Package::Anon' but it's not found
t/bare-anon-basic.t .............. skipped: This isn't really going to work yet, probably
t/bare-anon.t .................... skipped: This isn't really going to work yet, probably
t/basic.t ........................ Can't locate object method "new" via package "Package::Stash" at t/basic.t line 317.
BEGIN failed--compilation aborted at t/basic.t line 317.
t/basic.t ........................ Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/compile-time.t ................. 1/?
# Failed test 'use CompileTime;'
# at t/compile-time.t line 7.
# Tried to use 'CompileTime'.
# Error: Can't locate object method "new" via package "Package::Stash" at t/lib/CompileTime.pm line 10.
# BEGIN failed--compilation aborted at t/lib/CompileTime.pm line 13.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Looks like you failed 1 test of 1.
t/compile-time.t ................. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/edge-cases.t ................... Can't locate object method "new" via package "Package::Stash" at t/edge-cases.t line 28.
t/edge-cases.t ................... Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/extension.t .................... Can't locate object method "new" via package "My::Package::Stash" at t/extension.t line 19.
t/extension.t .................... Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/get.t .......................... Can't locate object method "new" via package "Package::Stash" at t/get.t line 12.
BEGIN failed--compilation aborted at t/get.t line 15.
t/get.t .......................... Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/impl-selection/basic-pp.t ...... Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
Compilation failed in require at t/impl-selection/basic-pp.t line 9.
BEGIN failed--compilation aborted at t/impl-selection/basic-pp.t line 9.
t/impl-selection/basic-pp.t ...... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/impl-selection/basic-xs.t ...... Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
Compilation failed in require at t/impl-selection/basic-xs.t line 10.
BEGIN failed--compilation aborted at t/impl-selection/basic-xs.t line 10.
t/impl-selection/basic-xs.t ...... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/impl-selection/bug-rt-78272.t .. 1/?
# Failed test 'Arbitrary code in $ENV throws exception'
# at t/impl-selection/bug-rt-78272.t line 12.
# 'Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
# BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
# Compilation failed in require at t/impl-selection/bug-rt-78272.t line 11.
# '
# doesn't match '(?^:PP; exit 1 is not a valid implementation for Package::Stash)'
# Failed test 'Sanity check: forcing package reload throws the exception again'
# at t/impl-selection/bug-rt-78272.t line 21.
# 'Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
# BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
# Compilation failed in require at t/impl-selection/bug-rt-78272.t line 19.
# '
# doesn't match '(?^:PP; exit 1 is not a valid implementation for Package::Stash)'
# Failed test 'Valid $ENV value loads correctly'
# at t/impl-selection/bug-rt-78272.t line 36.
# got: 'Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
# BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
# Compilation failed in require at t/impl-selection/bug-rt-78272.t line 29.
# '
# expected: undef
# Looks like you failed 3 tests of 3.
t/impl-selection/bug-rt-78272.t .. Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/3 subtests
t/impl-selection/choice.t ........ Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
Compilation failed in require at t/impl-selection/choice.t line 8.
t/impl-selection/choice.t ........ Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/impl-selection/env.t ........... Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
Compilation failed in require at t/impl-selection/env.t line 12.
t/impl-selection/env.t ........... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/impl-selection/var.t ........... Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
Compilation failed in require at t/impl-selection/var.t line 12.
t/impl-selection/var.t ........... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/io.t ........................... Can't locate object method "new" via package "Package::Stash" at t/io.t line 25.
t/io.t ........................... Dubious, test returned 25 (wstat 6400, 0x1900)
No subtests run
t/isa.t .......................... Can't locate object method "new" via package "Package::Stash" at t/isa.t line 19.
t/isa.t .......................... Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/magic.t ........................ Can't locate object method "new" via package "Package::Stash" at t/magic.t line 11.
t/magic.t ........................ Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/paamayim_nekdotayim.t .......... Can't locate object method "new" via package "Package::Stash" at t/paamayim_nekdotayim.t line 10.
t/paamayim_nekdotayim.t .......... Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/scalar-values.t ................ Can't locate object method "new" via package "Package::Stash" at t/scalar-values.t line 13.
t/scalar-values.t ................ Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/stash-deletion.t ............... Can't locate object method "new" via package "Package::Stash" at t/stash-deletion.t line 15.
t/stash-deletion.t ............... Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/synopsis.t ..................... Can't locate object method "new" via package "Package::Stash" at t/synopsis.t line 9.
t/synopsis.t ..................... Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/warnings.t ..................... Can't locate Module/Implementation.pm in @INC (you may need to install the Module::Implementation module) (@INC contains: /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/arch /home/rabbit/.cpan/build/Test-Requires-0.07-gIlR0B/blib/lib /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/arch /home/rabbit/.cpan/build/Test-Fatal-0.013-u24ETc/blib/lib /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/arch /home/rabbit/.cpan/build/Try-Tiny-0.18-mAXc55/blib/lib /home/rabbit/devel/utils/perl /home/rabbit/devel/distar/lib /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1 /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1/x86_64-linux-thread-multi /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/5.18.1 .) at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
BEGIN failed--compilation aborted at /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_/blib/lib/Package/Stash.pm line 15.
Compilation failed in require at t/warnings.t line 6.
BEGIN failed--compilation aborted at t/warnings.t line 6.
t/warnings.t ..................... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Test Summary Report
-------------------
t/00-compile.t (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/addsub.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/basic.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/compile-time.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/edge-cases.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/extension.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/get.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/impl-selection/basic-pp.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/impl-selection/basic-xs.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/impl-selection/bug-rt-78272.t (Wstat: 768 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 3
t/impl-selection/choice.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/impl-selection/env.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/impl-selection/var.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/io.t (Wstat: 6400 Tests: 0 Failed: 0)
Non-zero exit status: 25
Parse errors: No plan found in TAP output
t/isa.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/magic.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/paamayim_nekdotayim.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/scalar-values.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/stash-deletion.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/synopsis.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/warnings.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=25, Tests=8, 1 wallclock secs ( 0.08 usr 0.02 sys + 0.72 cusr 0.12 csys = 0.94 CPU)
Result: FAIL
Failed 21/25 test programs. 5/8 subtests failed.
make: *** [test_dynamic] Error 2
DOY/Package-Stash-0.36.tar.gz
one dependency not OK (Module::Implementation); additionally test harness failed
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports DOY/Package-Stash-0.36.tar.gz
Running make install
make test had returned bad status, won't install without force
This bit is suspicious:
CPAN.pm: Building D/DR/DROLSKY/Module-Implementation-0.07.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Module::Implementation
Writing MYMETA.yml and MYMETA.json
Running Build for Z/ZE/ZEFRAM/Module-Runtime-0.013.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Module-Runtime-0.013-5oFXut
Has already been made
Running Build test
Has already been tested successfully
Running Build install
Building Module-Runtime
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/lib/site_perl/5.18.1/Module/Runtime.pm
Installing /home/rabbit/perl5/perlbrew/perls/5.18.1/man/man3/Module::Runtime.3
ZEFRAM/Module-Runtime-0.013.tar.gz
./Build install -- OK
make: *** No targets specified and no makefile found. Stop.
DROLSKY/Module-Implementation-0.07.tar.gz
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Running make for D/DO/DOY/Package-Stash-0.36.tar.gz
Has already been unwrapped into directory /home/rabbit/.cpan/build/Package-Stash-0.36-IbyZ1_
"Writing Makefile for Module::Implementation" then "Running Build for Module-Runtime"
I can replicate on 5.18.1, but it appears fixed with CPAN.pm master branch in the repo.
I suspect it might have been fixed with fa1d3087d5246a08741c944768a9732c35c944af but RT is down so I can't see the original bug that it claims to fix.
To a layman this looks rather unrelated :( https://rt.cpan.org/Ticket/Display.html?id=86915. But if it fixes it all is well I suppose.