Scopy 2.0.0 on Win10 with ADALM2000 - Scopy shutsdown short after clicking "connect"

[Hakunadi]

Environment:

• Win10
• Scopy 2.0.0

Describe the bug When Scopy 2.0.0 is started on a win10 machine, it recognizes the connected M2K. But there is already a small orange x symbol as warning.

Then clicking correct starts calibration of Osci, Spectrum Analyzer, Network Analyzer and Signal generator, whereas the rest is already ready to use (square sign as stop button). Few seconds later, Scopy windows suddenly shuts down, before finishing the calibrations.

To Reproduce Steps to reproduce the behavior:

1. Click on 'Connect'
2. Observe the analyzers, osci etc will be calibrated....
3. See the crash and shut down of the compete Scopy window.

See pictures at https://ez.analog.com/sw-interface-tools/f/q-a/597450/scopy---adalm2000-recognized-tried-to-lick-on-connect-few-secs-later-scopy-crashes-and-shuts-down

[adisuciu]

Hello, I see you are running firmware 0.25. We've seen some crashes lately related to that.

Can you update to the latest firmware ?

https://github.com/analogdevicesinc/m2k-fw/releases/tag/v0.33 https://wiki.analog.com/university/tools/pluto/users/firmware?s[]=update&s[]=firmware

-Adrian