Arnaud Mouiche

[Not sure you received the answer I sent with an email... github didn't seem to relay it] Hello. can you run the following commands and send the result: uname -a...

Sorry, being busy. The interesting part in the trace is ``` [ 32.000304] cmdlinepart: unknown parameter 'Config),256k@0xc0000(NAS' ignored [ 32.085939] cmdlinepart: unknown parameter 'Config)" ' ignored ``` For some reasons,...

Hello.I'm currently looking in your problem.but testing recovery + install + fix takes lot of time... be patient. Arnaud On Sun, 2022-03-20 at 10:14 -0700, lapourgagner wrote: > Hi, >...

Well, here is the status: - the kernel used during the installer is fine - The kernel flash by the Debian buster installer (Linux debian 4.19.0-19-marvell #1 Debian 4.19.232-1 (2022-03-07)...

Ok, it even more simple... so forget what is just before. I finally understand what's happened. - various kernel modules are loaded from userland with "modprobe" - it looks like...

On Thu, 2022-03-24 at 03:32 -0700, BZmatthias wrote: > Hello Arnaud, > > sorry your last comment was a little late for me. I tryed the: > > cd /etc/flash-kernel/dtbs/...

I also have a TS-419p+. As far as I remember, the LCD pannel must be disconnected with a jumper to let have a proper uboot console see https://www.cyrius.com/debian/kirkwood/qnap/ts-41x/serial/ id="-x-evo-selection-start-marker"> On...

In sure that baurate = 115200 for the bootloader. what kind of serial port adapter are you using ? Can you take of photo ? On Thu, 2022-03-24 at 07:20...

Can you run "printenv" to display the current uboot configuration ? Arnaud On Sat, 2023-04-29 at 01:15 -0700, BZmatthias wrote: > Hello every one, > sorry for the long time...

Ok, You have performed the resizing at a time where recovery was not working due to 2 issues: - spaces "U-Boot Config" and  "NAS Config" in in bootargs , triggering...