amazingproducer

It usually dies at around a day of working. I'll run it and check in with you tomorrow. In the mean time, I'll look for an sd card to try...

I'll keep a watch on it or something. ``` watch -d free -m ```

Well, it was running okay. The last info I got from monitoring memory was: ``` Every 2.0s: free -m Thu Jun 13 03:33:29 2019 total used free shared buff/cache available...

I found another card and tried it with that one overnight. The log is incomplete, but it shows similar results: ``` [31312.874350] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [31365.817366]...

I tried turning it on: ``` U-Boot SPL 2017.09-h2 (Jul 06 2018 - 10:16:12) DRAM: 512 MiB Trying to boot from MMC1 BPI: skip sunxi_mmc_getcd pin 166(1) U-Boot 2017.09-h2 (Jul...

I added some stuff to ramdisk, hoping to decrease disk writes, so my current fstab looks like this: ``` /dev/mmcblk0p1 /boot ext4 defaults,noatime,commit=1800 0 2 /dev/mmcblk0p2 / ext4 defaults,noatime,commit=1800 0...

Just for the root partition? Also, fsck passed for both partitions.

I'm using python3.8 and have not enabled MFA -- is MFA a requirement?

Shucks. I guess for now, my wyze bulbs will continue to languish, unused. The idea of asking a Seattle startup for permission every time i want to use my lights...