linux_nvidia_jetson

linux_nvidia_jetson copied to clipboard

Hi Allied Vision I have two 1800 158C MIPI-CSI_2 cameras for a stereo-camera application. I'm using a Jetson Nano and an Ant Micro open source Jetson baseboard derivative with the...

BlueprintLab-s-hall

After download and running the setup (with "./setup Documents nano") successfully I get the following message on running the step 3: itec@itec-desktop:~/Downloads/linux_nvidia_jetson-l4t-32.5.1-2.1.0/avt_build$ sudo ./build.sh Documents nano all all >> [i]...Running...

estgv18632

Hi, I was wondering if it is possible to use gstreamer with a v4l2src but with an external hardware trigger configured? I was hoping I could set the trigger registers...

jrtcppv

Adresses https://github.com/alliedvision/linux_nvidia_jetson/issues/19

fschwa

Failed to cross-compile kernel as build.sh step

1

After successfully running `prepare.sh` I run `./build.sh work_dir nx all all`, but at some point I'm getting ``` /usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here CHK scripts/mod/devicetable-offsets.h...

dimaxano

Jetpack 4.6 support?

9

Jetpack 4.6 is released, is there any ETA on supporting it? It introduces tons of features that make downgrading to 4.5.1 not feasible.

makkarpov

Wrong location of deployed kernel modules ?

2

Hi, The **install.sh** script seems to unpack kernel modules into **/lib/modules/4.9.201**. Meanwhile the default modules location is **/lib/modules/4.9.201-tegra**. Is it an expected behavior ? Best regards, Pascal.

l4es

Deploy tarball for Xavier NX target does not work

6

Hi again, I'm still working with master and l4t-32.5.1. When I ran deploy.sh command to generate the tarball for Jetson Xavier NX as target, I got following error : Generate...

l4es

Corrected deploy.sh to handle target "nx" when making tarballs

1

Two changes to deploy.sh so it works with the target "nx" when making tarballs * Quote "nx" in the target selection if/else block (not enough of a shell expert to...

amarburg

Hi, with reference to https://github.com/alliedvision/linux_nvidia_jetson, I used method B, I installed driver (AlliedVision_NVidia_nano_L4T_32.5.1_4.9.201.tar.gz), and rebooted Jetson (4GB version), but there is no detection of the Camera (Alvium 1800 C-319c color...

fderrico