GammaKiwi
GammaKiwi
A updated version (still alpha) is being made by Allan Lind. How to intergrade/link the information?
N1c084, I have uploaded 3.02 ver BOM, POS and GERBER files for this huge 7 module board. You have everything you need to get these manufactured at JLPCB. I had...
A updated version (still alpha) is being made by Allan Lind. How to intergrade/link the information?
The design includes high current path so no need to use bus bars. The board goes directly onto the modules. I’ll double check the pos file for correct rotation.
A updated version (still alpha) is being made by Allan Lind. How to intergrade/link the information?
OK I’ll update the pos file tomorrow. The pcb tracks are likely good for 40A. I have 8 of these boards in parallel and have run 180A total without overheating...
A updated version (still alpha) is being made by Allan Lind. How to intergrade/link the information?
I double checked the pos file and it is actually correct. Here is the response from JLCPCB: "having trouble with pos file. In kicad all components are oriented correctly in...
A updated version (still alpha) is being made by Allan Lind. How to intergrade/link the information?
Not sure what you mean by Gen 4. My design is for 24kwh Gen 1 or Gen 2 modules only. You cannot use 30 and 40kWh modules as these are...
A updated version (still alpha) is being made by Allan Lind. How to intergrade/link the information?
Detail showing how the modules are wired to the MCBs.  This photo shows the bas bars where all 8 banks come together. You can also see a 160A per...
A updated version (still alpha) is being made by Allan Lind. How to intergrade/link the information?
Not sure how one would do that.
The Victron Multiplus has AC current monitoring on it’s input and output so i don’t see why it would need a shunt on AC. It should also be measuring the...
I understand that. What I am trying to say is that the current shunt will tell diyBMS controller the instantaneous battery current , the +/-W setting and the battery charge...