kicad-pcblib
kicad-pcblib copied to clipboard
alexisvl
Generate KiCad libraries from the FreePCB IPC libraries
I'm pretty sure the pin numbers on the `CONN-10029449-111RLF.kicad_mod` in `conn-fci.pretty` is reversed. When looking at the datasheet (https://www.amphenol-icc.com/media/wysiwyg/files/drawing/10029449.pdf) on sheet 4 the recommended PCB layout clearly marks the contacts...
I would like the use freepcb2pretty.py to convert my freepcb custom footprint files. What command line syntax would I use for a file called midcom.fpl? Thanks Ron [midcom.zip](https://github.com/cpavlina/kicad-pcblib/files/2307978/midcom.zip)
The manuf:BOURNS-TC33X-2 footprint has a 1.6mm gap between the pads for pins 1 and 3. However, the Bourns datasheet shows the gap should be 0.8mm: http://www.bourns.com/docs/Product-Datasheets/TC33.pdf
This links in the 3d model for the SOIC-16 footprint by adding an entry to config/3dmap and regenerating the footprints.
Board edge USB A plug connector from CUI. UP2-AH-1-TH https://github.com/cpavlina/kicad-pcblib/compare/USB_A_CONN_Addition?expand=1#diff-882f0e6910964f9d51da88fe628c70d3
