openwrt-masq6
openwrt-masq6 copied to clipboard
akatrevorjay
Easy to use firewall.d hook to allow you to specify masq6 right as you'd expect.
When using miniupnpd with NAT6 enabled, the NAT6 firewall script will error out with the following error when one or more upnp lease is defined. ``` ip6tables-restore v1.8.3 (legacy): host/network...
Hi, I followed the [updated guide](https://wiki.openwrt.org/doc/howto/ipv6.nat6) but ran into some errors. Router: Lenovo Y1 Firmware: Chaos Calmer 15.05.1 1. There isn't a configuration directory called /etc/firewall.d/with_reload/, I created it anyway...
Hi, I've tried to follow the guide [here](https://openwrt.org/docs/guide-user/network/ipv6/ipv6.nat6) to enable ipv6 nat, so I've used your script. First of all the one on the wiki is a bit outdated and...
Supposing I don't use prefix delegation and my clients get their IP address by manual configuration. Is it mandatory to configure IPv6 NAT with the -s parameter?
Metadata
Owner
Metadata
Easy to use firewall.d hook to allow you to specify masq6 right as you'd expect.