Ahmad Byagowi

This is a common practice to not rely on the 3.3v or 5v rails of the PCIe and only use the 12v to make your own voltages. I am open...

@oiaohm, sorry for getting back to you after a year. I just noticed this comment and I find it very interesting. Things that I am not sure about are, the...

Hello @wizzomafizzo , Perfect timing. @ebraminio and I did some work over the weekend. So, we have something that works and needs to get integrated into BGM. Please find attach...

Let's do it. It all sound great. Unfortunately there is no way to detect if an MT32-Pi is connected as there is no feedback from the ALSA MIDI client AFAIK....

Perhaps that is because it that point the internal XTAL on the SOM is in use.

Probably you will be fine with either. Sorry for the delayed response.

@julianstj1 did we address this?

@julianstj1, let's route the BITE pin to P6 on the next revision.

Thank you for the edits and comments. Microchip along with other MAC manufacturers contributed to the OCP Specs sheet. So, it is all good.

thanks to @lasselj and @geerlingguy I can confirm this problem is resolved. You need to get the latest Raspbian and add the "dtoverlay=pciex1-compat-pi5,mmio-hi" to your config.txt and importantly you need...