Stefan Agner

@daviddesmet that is a very interesting observation. Sounds as if the new Linux 6.6 kernel in combination with Edge TPU and the particular PCIe port triggers it? :thinking: Is the...

@gjobin it seems you are not using a Edge TPU or Frigate add-on, so this is unlikely related with this issue. Please open a new issue so we can investigate...

This seems like some corruption on the storage. Can you try this command from the console? ``` ha supervisor repair ```

@EDIflyer @perrucon do you see the same issue in the host logs OP is seeing (`too many levels of symbolic links`)? This is likely caused by some file system corruption...

@hostops it seems you have a new installation? In that case installing HAOS onto the SD card is probably your best option. If the problem persists, there might be a...

@EDIflyer hm, it seems that your case changed from EOF to Not Found? :thinking: Can you check the Host logs after a failed attempt?

There are several similar reports with USB devices going missing in this issue tracker, e.g. #2995. Did this start with recently? E.g. can you try to downgrade to 11.1 using...

@djansen1987 you can also go further back then 11.1, e.g. 10.5. You are certain that the same hardware combination used to work reliably at one point? From the host logs...

The logs show various USB related issues, e.g. this: ``` Jan 15 08:53:06 homeassistant kernel: usb 2-7: reset full-speed USB device number 5 using xhci_hcd Jan 15 08:53:21 homeassistant kernel:...

The original poster reported this on a Raspberry Pi 4, so let this issue be about Raspberry Pi 4 only. On the Raspberry Pi 5 the update system is different...