ag88

thanks ! i'd try to install a next release and test it. for now my guess is we can assume default kg and one decimal points till someone tells that...

as i read the specs, maybe there are other data in the 'connected' mode, but for now we'd make do with just extracting data from the broadcasts which is purely...

hi all, just feedback, I tested openScale 2.4.0 release on my ChipSea based OKOK 1.1 scale https://github.com/oliexdev/openScale/releases/tag/v2.4.0 And it works ! Thanks all. The key is one need to connect...

this is kind of 'off-topic', under bulk transfer section, under 'OUT' https://www.usbmadesimple.co.uk/ums_3.htm if the device can't accept the data, it is supposed to send 'NAK', i'm not sure if this...

at the moment, i'd suggest this as a partial solution, you could copy the relevant codes for the usb stack etc and perhaps place that in the sketch folder etc....

this is done back then when I'm trying to use the backup registers on stm32f401. The readme.md in this commit is here https://github.com/rogerclarkmelbourne/Arduino_STM32/pull/850/files#diff-5b489eef3ad090c0a5bed41a1f684527533ee35d6300a3ec9e008013bf280689 and the test is here, it is...

thanks ! I'd monitor issues here and in www.stm32duino.com and would respond just in case someone is after all using it

try clearing the browser cache or reload the page without accessing the cache (control-F5 or shift-F5 in Chrome I think.)

Thanks, I've an 'old' Atmega based MKS board. I'd be buying MKS's STM32 boards, as I'm a fan of STM32. But actually the most important thing to fix for other...

just reposting this in case anyone is interested https://forum.armbian.com/events/event/47-armbian-documentation-follow-up/