Aleksej Fomin

Hello. Please use link below: http://wiringpi.com/download-and-install/ It should be helpful to you. Regards. пт, 11 сент. 2020 г. в 02:20, CPAeby : > Hi guys, > > I have difficulties...

Hello. We have a Hardware pinout and logic on the Board for the PIR sensor. However we did not implemented its usage in the Software (Firmware). One of our buyers...

If You still want this, You need to find and comment the string like this: if ((menuPosition == TimeIndex) || (modeChangedByUser == false) ) modesChanger();

Yes, it is possible. You can have only SlotMachine without Date and Temp display. пн, 13 янв. 2020 г. в 16:07, z0ne123 : > If You still want this, You...

Hello. Please use attached screenshot from Debug window as reference. Comment highlighted portions as shown. And add line of code that is underlined at bottom of screenshot. That should omit...

Typical problem is in power adapter. Check voltage at test points: TP1 - must be 12-15 Volts TP3 - must be 5 Volts TP4 - must be 170-190 Volts 2018-02-17...

Yes, it will work only with external power adapter 12-15 Volts, 1 (or more) Ampere. 21 февр. 2018 г. 6:42 ПП пользователь "Ryan C. Creasey" < [email protected]> написал: > Ah,...

Sorry for delay with answer. With good quality 12 Volts adapter, you must get about 11.2 Volts on TP1!!! I think than You need to replace your adapter. 2018-02-25 2:25...

Hello. Our Raspberry Pi configuration Clocks support only the basic time display feature. All other functions that are made for our Arduino Clocks you will need to do by yourself....

I would like to know this too.