NixeTubesShieldNCS314 icon indicating copy to clipboard operation
NixeTubesShieldNCS314 copied to clipboard

Published 20 hours ago • verified publisher icon afch

error

Open stilloading opened this issue 6 years ago • 6 comments

i get this avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 1 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 2 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 3 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 4 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 5 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 6 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 7 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 8 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 9 of 10: not in sync: resp=0xa4 avrdude.exe: stk500_recv(): programmer is not responding avrdude.exe: stk500_getsync() attempt 10 of 10: not in sync: resp=0xa4

avrdude.exe done. Thank you.

what to do ? i am using arduino uno,

stilloading avatar Oct 31 '18 17:10 stilloading

Maybe wrong serial port or wrong processor was selected.

afch avatar Nov 01 '18 15:11 afch

i only have one port to chose from, and i have this arduino https://www.ebay.com/itm/263884202082 and on the internet it says there is no difference in this arduino borad compared to others.

stilloading avatar Nov 01 '18 21:11 stilloading

found out its the arduino that is faulty.

stilloading avatar Nov 02 '18 15:11 stilloading

i only have one port to chose from, and i have this arduino https://www.ebay.com/itm/263884202082 and on the internet it says there is no difference in this arduino borad compared to others. try to install this driver: https://gra-afch.com/drivers/CH340g_Windows_Drivers.zip

afch avatar Nov 06 '18 18:11 afch

i still get same problem avrdude: Version 6.3-20171130 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch

     System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf"

     Using Port                    : COM3
     Using Programmer              : arduino
     Overriding Baud Rate          : 115200

avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x6c avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x6c

avrdude done. Thank you.

Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

stilloading avatar Nov 06 '18 20:11 stilloading

i foubd out its the firmware on the arduino that is faulty because it is cheap, i fixed it by following this video https://www.youtube.com/watch?v=90GZ7WhvubM But now i have the problem that it suddenly stops and plasshes as seen here in the end of the video (i also had problems with the RGB LED,s but that was just bad soldering on my part) https://www.youtube.com/watch?v=4lqBJLeyx8Q&feature=youtu.be&fbclid=IwAR1T2_zO5wJcUzkBuxPOjpcaaFyZgzbsD_Kk9Z0eeLWtrxXRp7nhhy_4DUk

stilloading avatar Nov 25 '18 21:11 stilloading