Andrea Donno

Ok that's wierd. It should connect to HA does it connect to it? Does the card appear in the logs when scanned ? Scan a card while logging just to...

and you have been using the cards that are provided with the boards ? Or did these come without a card ?

i don't get the issue and you did use the code that is provided on github without altering it?

Steps : 1. solder evrything togehter as per : (in you case ignore the LED and Buzzer) https://github.com/adonno/tagreader/blob/master/Schematics/tag_reader_schematics_v3.2.png 2. flip the N1 switch to ON on the PN532 3. Connect...

i've been trying with both openCV via apt and pip on Rpi 4 64bits Bullseye the one installed with apt allow me to start pibooth, but then i get an...

I'll leave tonight for 3 days but i'll come back with logs when i'm back thank you. Can't wait to get it finally working and to start adding hardware buttons.

> In order to install GPhoto, I've used: > > > > ``` > > wget https://raw.githubusercontent.com/gonzalo/gphoto2-updater/master/gphoto2-updater.sh > > wget https://raw.githubusercontent.com/gonzalo/gphoto2-updater/master/.env > > chmod +x gphoto2-updater.sh > > sudo ./gphoto2-updater.sh...

hi i'm finally back from vacation Like i said I installed the PIP version and have tried with legacy on and off from the raspi-config If I try with a...

``` gphoto2 2.5.28 Copyright (c) 2000-2021 Marcus Meissner and others gphoto2 comes with NO WARRANTY, to the extent permitted by law. You may redistribute copies of gphoto2 under the terms...

btw thank you for your quick response