Adrian Suciu

Continuing the discussion from commit https://github.com/analogdevicesinc/scopy/commit/5357a6ed74fc298dd0d3b412d4f2627f8f88022c regarding mat file support -

Continuing the discussion regarding debugger UI - https://github.com/analogdevicesinc/scopy/pull/324 @rgetz @mhennerich @acozma

Implement holdoff functionality. After triggering, the trigger should no longer be armed for a configurable period of time.

External clock will be handled by either manually setting external clock frequency, and scopy will assume this is the correct frequency/sample rate. If external clock frequency is not set, logic...

Pattern triggering consists in activating the DMA when a condition occurs. A usecase for this would be an SPI pattern being generated only when a pin transition occurs (chip select...

Add oversampling parameter to buffered signal generation.

Oscilloscope FFT enhancements

2

Implement FFT window plot. Should the FFT instrument from the oscilloscope use the same settings as the spectrum analyzer or we should have a different set of settings ? Which...

Implement oscilloscope rolling mode (slow timebase, no triggers)

Implement a functionality where the pattern generator can compose multiple patterns on the same line.

Scopy crashes on windows 10 when starting Voltmeter while Oscilloscope is running https://ez.analog.com/adieducation/university-program/f/q-a/561979/scopy-1-4-1-crashes-with-win10-using-voltmeter-and-scope