Allen Derusha

Just throwing out ideas as to what might be happening there on your network, thought being maybe you have two devices publishing on the same topic but one of them...

The LWT timeout is set by the "keepalive" value, which you can change in the pubsubclient.h file. You can find details about this [here](https://github.com/knolleary/pubsubclient#limitations) and you can see the `#define`...

> Allen, I found the file but will take your advice and leave it at 15 sec.  Thanks so much for your help and quick response!  You're welcome! > I...

That, and also because WiFi can be spotty, particularly when there is a $1 device with a PCB antenna involved. So if for whatever reason it goes offline for a...

I've installed the [BTVS sniffer from Microsoft](https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/testing-btp-tools-btvs) and fired it up with Wireshark to grab the service discovery messages from the device. I'm seeing the following two BLE advertisement messages...

This is indeed the pink variant, purchased here: https://www.amazon.com/dp/B09JWJL9RR?psc=1&ref=ppx_yo2ov_dt_b_product_details Another user has dumped some data for the home assistant BLE custom component here: https://github.com/custom-components/ble_monitor/issues/809 Let me see what I can...

I enabled BT debug logging on my Android device, ran through the connection process in Smart Life, and dumped the results [here](https://svideo.org/btsnoop_hci.zip) The patched Windows build now shows the device...

Addressed in dev-1.06

whoops, didn't mean to close :D Re-opening until 1.06 is released.

`rebootOnp0b1` is set `true` while the code is handling the [WiFi connection](https://github.com/HASwitchPlate/HASPone/blob/main/Arduino_Sketch/HASwitchPlate/HASwitchPlate.ino#L1962) or [MQTT connection](https://github.com/HASwitchPlate/HASPone/blob/main/Arduino_Sketch/HASwitchPlate/HASwitchPlate.ino#L326) with the intent of giving the user a chance to reboot the system during these...