adamhratcliffe

In the config.py check the sample rate. My sensor only works if the rate is 0.2 and above. Adam. On Sun, 20 Jan 2019 at 11:43, rwr88 wrote: > [image:...

Once you have SSH’ed into your pi use the following command sudo nano /root/silvia-pi/config.py Thanks, Adam > On 20 Jan 2019, at 11:49, rwr88 wrote: > > Images weren't visible,...

Hello. You press control and W Thanks, Adam > On 20 Jan 2019, at 12:26, rwr88 wrote: > > Adam, > Thanks so much for your help. I feel like...

Right so it definitely isn’t saving. At the bottom the the nano window it should say which buttons to Press to save. It should give you a prompt as you...

Hello. The heating element issue may be down to the config pin you have selected for the heating element. In the config.py file change the he pin to 37 (I...

I can do but you'll have to wait for a few hours until I am home. Have you managed to find a way to save it control and x doesnt...

Excellent, any luck with it working now? On Tue, 22 Jan 2019 at 16:12, rwr88 wrote: > Yeah, you're right..it was ctrl x.. now I've saved both changes > >...

I’m also having a similar problem. My temp sensor is working but when the temp hits the threshold it doesn’t trigger the relay. At first I thought the relay may...

 Hello, I have wired mine like this. I can get the web server to read my temps on :8080 but the pi doesn't switch off the relay. I have...

Will I have to change the config to pin 37? Thanks. On Tue, 30 Oct 2018 at 20:24, Bryce Thomas wrote: > Adam, move the purple wire next to the...