Adafruit_ILI9341
Adafruit_ILI9341 copied to clipboard
Teensy 4 should use fast SPI like T3.x, not 8 MHz like Teensy 2.x
Previously, if one were using this library with a Teensy 4.0 or 4.1, it would use the Teensy 2 SPI speed of 8 MHz because the code was written before T4 existed, and TEENSYDUINO
is still defined. However, Teensy 4.x is faster than T3.x, and should at minimum use the same speed as T3.x (40 MHz). This PR fixes that.
Empirically I tested an ILI9341 display with 80MHz on the teensy 4.1 and it handled that fine too -- happy to change the define to that too if anyone feels it necessary (although i havent verified the chip is spec'd to operate at that speed, and that will make more sensitive to trace capacitance).