Adafruit_BMP3XX

Adafruit_BMP3XX copied to clipboard

Wrong pressure reported when using a BMP388 and BMP390 at the same time

8

When attempting to run the simpletest for an Adafruit BMP390 and Adafruit BMP388 at the same time, the pressure reported back on one device will always be wrong. This was...

theswordsmith

Operation mode

4

@ladyada Normal mode improves significantly performance in particular at higher IIR filter settings This mode is recommended in the data sheet chapter 3.3.3 for using IIR filters. --> Suggest change...

jps2000

Add possibility to set power mode, add function for calculate sea level pressure

3

**Add setconfig function:** - set pressure oversampling - set temperature oversampling - set IIR filter - set powermode - set ODR (output data rate) - set interrupt (data ready interrupt,...

germsb