acedogblast
acedogblast
Thanks for the information. The current voltage divider for `T_VCC_MEAS` uses two 47K resistors which would divide the voltage in half. Half of 5V is 2.5V which should be fine...
Another detail, the voltage translators actually can do up and down translation anywhere in the 0.8-5.5V range on either side. The limitation of one-side must having the higher voltage is...
Another concern that I have found is that ~RESET for the target is not handled through a voltage translator. It is only pass through the NUF8401 100ohm chip then to...
Thanks for the info. I am not very familiar with working with C Macros and change is very simple so I don't think I can submit such patch. Just wondering...
Oh wow. That was fast. Thanks for your work to bring rust to the new rp chips.
I too am getting the `Failed to initialize VSScript ` error. I am building R68 from Ubuntu 22.04 LTS. Edit: Never-mind I also had to update cython to 3.0.10.
Some EPDs do not require the busy to be high after the initial reset. I am using a GoodDisplay GDEY029T94 (epd2in9_v2) and it does not set the busy high so...