rtl8812AU_8821AU_linux
rtl8812AU_8821AU_linux copied to clipboard
abperiasamy
Monitor Mode not working
Hi there, I am using Dual-band Wireless-AC1200 USB 3.0 Wi-Fi Adapter in Kali Linux with kernel version 4.0.0-kali1-amd64.When I use the command :
" airmon-ng start wlan0"
The output is:
"No interfering processes found PHY Interface Driver Chipset
ethtool failed... only mac80211 devices on kernel 2.6.33 or higher are officially supported by airmon-ng"
and also the device stops blinking. The Monitor mode of the adapter is not working using this driver 8812au. Please help.
ifconfig wlan0 down
iwconfig wlan0 mode monitor
ifconfig wlan0 up
proceed to airmon-ng check kill
airodump-ng
"iwconfig wlan0 mode monitor" doesn't work with D-Link DWA-172. @fatfarm what device do you have?
This driver does not support monitor mode. It is hardmac-based and therefore most likely will never support monitor mode.
im using the alfa awus036ach on kali linux. the adapter does go into monitor but wont inject packets.
On Sun, Nov 15, 2015 at 1:40 PM, bits3rpent [email protected] wrote:
This driver does not support monitor mode. It is hardmac-based and therefore most likely will never support monitor mode.
— Reply to this email directly or view it on GitHub https://github.com/abperiasamy/rtl8812AU_8821AU_linux/issues/97#issuecomment-156846135 .
I have the same adapter and I have a hard time with it. Same issues. Goes in monitor mode but does not show any connections at all. On the old driver. When I install the GitHub driver and do upgrade it does not show the wlan0. idk
