colima
colima copied to clipboard
Published
20 hours ago •
abiosoft
abiosoft
Colima start stuck at Waiting for the essential requirement 1 of 5: "ssh"
Description
I am using Mac Intel (12.6.1)
colima start command is stuck at
INFO[0000] starting colima
INFO[0000] runtime: docker
INFO[0000] preparing network ... context=vm
INFO[0000] starting ... context=vm
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
Version
Colima Version: 0.5.4 Lima Version: Qemu Version:
Operating System
- [ ] macOS Intel <= 12 (Monterrey)
- [ ] macOS Intel >= 13 (Ventura)
- [ ] macOS M1 <= 12 (Monterrey)
- [ ] macOS M1 >= 13 (Ventura)
- [ ] Linux
Output of colima status
FATA[0000] error retrieving current runtime: empty value
Reproduction Steps
- I used to start colima always with
colima start --cpu 4 --memory 12 --disk 100 - It used to work fine. Suddenly I had to reboot mac
- Started colima by mistake with
colima startwithout any args
Expected behaviour
No response
Additional context
serial.log
[2J[01;01H[=3h[2J[01;01HBdsDxe: failed to load Boot0001 "UEFI QEMU QEMU CD-ROM " from PciRoot(0x0)/Pci(0x1,0x0)/Scsi(0x0,0x0): Not Found
BdsDxe: loading Boot0002 "UEFI QEMU DVD-ROM QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)
BdsDxe: starting Boot0002 "UEFI QEMU DVD-ROM QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)
[0m[30m[47mWelcome to GRUB!
[0m[37m[40m[0m[30m[40m[2J[01;01H[0m[37m[40m[02;30HGNU GRUB version 2.06
[04;02HÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿[05;02H³[05;79H³[06;02H³[06;79H³[07;02H³[07;79H³[08;02H³[08;79H³[09;02H³[09;79H³[10;02H³[10;79H³[11;02H³[11;79H³[12;02H³[12;79H³[13;02H³[13;79H³[14;02H³[14;79H³[15;02H³[15;79H³[16;02H³[16;79H³[17;02H³[17;79H³[18;02HÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ[19;02H[20;02H Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. [05;80H [0m[30m[47m[05;03H*Linux virt [0m[37m[40m[05;78H[06;03H [06;78H[07;03H [07;78H[08;03H [08;78H[09;03H [09;78H[10;03H [10;78H[11;03H [11;78H[12;03H [12;78H[13;03H [13;78H[14;03H [14;78H[15;03H [15;78H[16;03H [16;78H[17;03H [17;78H[17;80H [05;78H[23;01H The highlighted entry will be executed automatically in 1s. [05;78H[23;01H The highlighted entry will be executed automatically in 0s. [05;78H[0m[30m[40m[2J[01;01H[0m[37m[40m[0m[30m[40m[2J[01;01H[0m[37m[40m Booting `Linux virt'
[ 0.000000] Linux version 5.15.82-0-virt (buildozer@build-3-16-x86_64) (gcc (Alpine 11.2.1_git20220219) 11.2.1 20220219, GNU ld (GNU Binutils) 2.38) #1-Alpine SMP Mon, 12 Dec 2022 09:15:17 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-virt modules=loop,squashfs,sd-mod,usb-storage console=tty0 console=ttyS0,115200
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[5]: 1088, xstate_sizes[5]: 64
[ 0.000000] x86/fpu: xstate_offset[6]: 1152, xstate_sizes[6]: 512
[ 0.000000] x86/fpu: xstate_offset[7]: 1664, xstate_sizes[7]: 1024
[ 0.000000] x86/fpu: Enabled xstate features 0xe7, context size is 2688 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 3632
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000007fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000800000-0x0000000000807fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000808000-0x000000000080afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000080b000-0x000000000080bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000080c000-0x000000000080ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000810000-0x00000000008fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000900000-0x000000007f0a8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f0a9000-0x000000007f169fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f16a000-0x000000007f8eefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f8ef000-0x000000007f9eefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f9ef000-0x000000007faeefff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007faef000-0x000000007fb6efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fb6f000-0x000000007fb7efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fb7f000-0x000000007fbfefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fbff000-0x000000007fedbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fedc000-0x000000007ff5ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ff60000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: SMBIOS=0x7f98a000 ACPI=0x7fb7e000 ACPI 2.0=0x7fb7e014 MEMATTR=0x7e7a2018
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 0.000000] last_pfn = 0x380000 max_arch_pfn = 0x400000000
[ 0.000000] Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] last_pfn = 0x7fedc max_arch_pfn = 0x400000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x372f3000-0x37970fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007FB7E014 000024 (v02 BOCHS )
[ 0.000000] ACPI: XSDT 0x000000007FB7D0E8 000054 (v01 BOCHS BXPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000007FB79000 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000007FB7A000 0021AE (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x000000007FBDD000 000040
[ 0.000000] ACPI: APIC 0x000000007FB78000 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x000000007FB77000 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: MCFG 0x000000007FB76000 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: WAET 0x000000007FB75000 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: BGRT 0x000000007FB74000 000038 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: Reserving FACP table memory at [mem 0x7fb79000-0x7fb790f3]
[ 0.000000] ACPI: Reserving DSDT table memory at [mem 0x7fb7a000-0x7fb7c1ad]
[ 0.000000] ACPI: Reserving FACS table memory at [mem 0x7fbdd000-0x7fbdd03f]
[ 0.000000] ACPI: Reserving APIC table memory at [mem 0x7fb78000-0x7fb7808f]
[ 0.000000] ACPI: Reserving HPET table memory at [mem 0x7fb77000-0x7fb77037]
[ 0.000000] ACPI: Reserving MCFG table memory at [mem 0x7fb76000-0x7fb7603b]
[ 0.000000] ACPI: Reserving WAET table memory at [mem 0x7fb75000-0x7fb75027]
[ 0.000000] ACPI: Reserving BGRT table memory at [mem 0x7fb74000-0x7fb74037]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000037fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000007fffff]
[ 0.000000] node 0: [mem 0x0000000000808000-0x000000000080afff]
[ 0.000000] node 0: [mem 0x000000000080c000-0x000000000080ffff]
[ 0.000000] node 0: [mem 0x0000000000900000-0x000000007f0a8fff]
[ 0.000000] node 0: [mem 0x000000007f16a000-0x000000007f8eefff]
[ 0.000000] node 0: [mem 0x000000007fbff000-0x000000007fedbfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000037fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000037fffffff]
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 8 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 240 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 193 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 784 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 292 pages in unavailable ranges
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] [mem 0xc0000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 54 pages/cpu s183896 r8192 d29096 u524288
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3093034
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-virt modules=loop,squashfs,sd-mod,usb-storage console=tty0 console=ttyS0,115200
[ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-virt modules=loop,squashfs,sd-mod,usb-storage", will be passed to user space.
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] printk: log_buf_len min size: 16384 bytes
[ 0.000000] printk: log_buf_len: 32768 bytes
[ 0.000000] printk: early log buf free: 8200(50%)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:byref(zero), heap alloc:on, heap free:off
[ 0.000000] Memory: 12221784K/12576452K available (10246K kernel code, 1189K rwdata, 3012K rodata, 1816K init, 2040K bss, 354408K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.000000] random: crng init done
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] printk: console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20210730
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.010000] APIC: Switch to symmetric I/O mode setup
[ 0.010000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.090000] tsc: Unable to calibrate against PIT
[ 0.090000] tsc: using HPET reference calibration
[ 0.090000] tsc: Detected 2303.659 MHz processor
[ 0.000007] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2134b582a7d, max_idle_ns: 440795221731 ns
[ 0.002782] Calibrating delay loop (skipped), value calculated using timer frequency.. 4607.31 BogoMIPS (lpj=23036590)
[ 0.005457] pid_max: default: 32768 minimum: 301
[ 0.013799] LSM: Security Framework initializing
[ 0.015071] landlock: Up and running.
[ 0.016537] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.018833] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.022921] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.024200] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.025731] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.027743] Spectre V2 : Mitigation: Retpolines
[ 0.028934] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.030944] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.032527] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[ 0.032782] RETBleed: Vulnerable
[ 0.033560] Speculative Store Bypass: Vulnerable
[ 0.034663] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.036205] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.038054] SRBDS: Unknown: Dependent on hypervisor status
[ 0.052923] Freeing SMP alternatives memory: 32K
[ 0.172780] smpboot: CPU0: Intel 06/7e (family: 0x6, model: 0x7e, stepping: 0x5)
[ 0.172780] Performance Events: unsupported p6 CPU model 126 no PMU driver, software events only.
[ 0.172780] rcu: Hierarchical SRCU implementation.
[ 0.172780] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.172780] smp: Bringing up secondary CPUs ...
[ 0.172780] x86: Booting SMP configuration:
[ 0.172798] .... node #0, CPUs: #1 #2 #3
[ 0.187894] smp: Brought up 1 node, 4 CPUs
[ 0.187894] smpboot: Max logical packages: 1
[ 0.192785] ----------------
[ 0.193676] | NMI testsuite:
[ 0.194371] --------------------
[ 0.195145] remote IPI: ok |
[ 0.196430] local IPI: ok |
[ 0.197245] --------------------
[ 0.198265] Good, all 2 testcases passed! |
[ 0.199415] ---------------------------------
[ 0.200459] smpboot: Total of 4 processors activated (18429.27 BogoMIPS)
[ 0.202972] devtmpfs: initialized
[ 0.203895] x86/mm: Memory block size: 128MB
[ 0.206305] ACPI: PM: Registering ACPI NVS region [mem 0x00800000-0x00807fff] (32768 bytes)
[ 0.206305] ACPI: PM: Registering ACPI NVS region [mem 0x0080b000-0x0080bfff] (4096 bytes)
[ 0.206966] ACPI: PM: Registering ACPI NVS region [mem 0x00810000-0x008fffff] (983040 bytes)
[ 0.212826] ACPI: PM: Registering ACPI NVS region [mem 0x7fb7f000-0x7fbfefff] (524288 bytes)
[ 0.215103] ACPI: PM: Registering ACPI NVS region [mem 0x7ff60000-0x7fffffff] (655360 bytes)
[ 0.217191] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.219998] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.224082] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.225599] audit: initializing netlink subsys (disabled)
[ 0.226926] audit: type=2000 audit(1680534851.310:1): state=initialized audit_enabled=0 res=1
[ 0.226926] thermal_sys: Registered thermal governor 'step_wise'
[ 0.226926] cpuidle: using governor ladder
[ 0.232785] cpuidle: using governor menu
[ 0.233860] ACPI: bus type PCI registered
[ 0.235054] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.236872] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[ 0.239088] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[ 0.240888] PCI: Using configuration type 1 for base access
[ 0.243656] Kprobes globally optimized
[ 0.244600] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.244600] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.254807] ACPI: Added _OSI(Module Device)
[ 0.254807] ACPI: Added _OSI(Processor Device)
[ 0.255132] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.256260] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.257686] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.258761] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.260023] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.263727] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.272935] ACPI: Interpreter enabled
[ 0.273952] ACPI: PM: (supports S0 S3 S5)
[ 0.274915] ACPI: Using IOAPIC for interrupt routing
[ 0.276126] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.278355] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.281770] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.282828] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.285168] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]
[ 0.286911] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[ 0.288863] PCI host bridge to bus 0000:00
[ 0.289986] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.291613] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.292790] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.294709] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
[ 0.296484] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.298535] pci_bus 0000:00: root bus resource [mem 0x800000000-0xfffffffff window]
[ 0.300347] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.302892] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.305373] pci 0000:00:01.0: [1af4:1004] type 00 class 0x010000
[ 0.307658] pci 0000:00:01.0: reg 0x10: [io 0x60c0-0x60ff]
[ 0.309820] pci 0000:00:01.0: reg 0x14: [mem 0xc0848000-0xc0848fff]
[ 0.315195] pci 0000:00:01.0: reg 0x20: [mem 0x800000000-0x800003fff 64bit pref]
[ 0.319330] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000
[ 0.322780] pci 0000:00:02.0: reg 0x10: [io 0x6160-0x617f]
[ 0.323446] pci 0000:00:02.0: reg 0x14: [mem 0xc0847000-0xc0847fff]
[ 0.327955] pci 0000:00:02.0: reg 0x20: [mem 0x800004000-0x800007fff 64bit pref]
[ 0.330646] pci 0000:00:02.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[ 0.334035] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00
[ 0.336203] pci 0000:00:03.0: reg 0x10: [io 0x6140-0x615f]
[ 0.338619] pci 0000:00:03.0: reg 0x14: [mem 0xc0846000-0xc0846fff]
[ 0.343906] pci 0000:00:03.0: reg 0x20: [mem 0x800008000-0x80000bfff 64bit pref]
[ 0.348723] pci 0000:00:04.0: [1af4:1050] type 00 class 0x030000
[ 0.351373] pci 0000:00:04.0: reg 0x10: [mem 0xc0000000-0xc07fffff pref]
[ 0.354405] pci 0000:00:04.0: reg 0x18: [mem 0x80000c000-0x80000ffff 64bit pref]
[ 0.356799] pci 0000:00:04.0: reg 0x20: [mem 0xc0845000-0xc0845fff]
[ 0.360982] pci 0000:00:04.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.362861] pci 0000:00:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.366040] pci 0000:00:05.0: [1af4:1052] type 00 class 0x090000
[ 0.368633] pci 0000:00:05.0: reg 0x14: [mem 0xc0844000-0xc0844fff]
[ 0.374325] pci 0000:00:05.0: reg 0x20: [mem 0x800010000-0x800013fff 64bit pref]
[ 0.377870] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090200
[ 0.380506] pci 0000:00:06.0: reg 0x14: [mem 0xc0843000-0xc0843fff]
[ 0.384360] pci 0000:00:06.0: reg 0x20: [mem 0x800014000-0x800017fff 64bit pref]
[ 0.387719] pci 0000:00:07.0: [1b36:000d] type 00 class 0x0c0330
[ 0.389873] pci 0000:00:07.0: reg 0x10: [mem 0x800020000-0x800023fff 64bit]
[ 0.394713] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000
[ 0.397724] pci 0000:00:08.0: reg 0x10: [io 0x6120-0x613f]
[ 0.400095] pci 0000:00:08.0: reg 0x14: [mem 0xc0842000-0xc0842fff]
[ 0.403774] pci 0000:00:08.0: reg 0x20: [mem 0x800018000-0x80001bfff 64bit pref]
[ 0.406416] pci 0000:00:08.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[ 0.410900] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[ 0.413431] pci 0000:00:09.0: reg 0x10: [io 0x6000-0x607f]
[ 0.415873] pci 0000:00:09.0: reg 0x14: [mem 0xc0841000-0xc0841fff]
[ 0.420404] pci 0000:00:09.0: reg 0x20: [mem 0x80001c000-0x80001ffff 64bit pref]
[ 0.424793] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.426981] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.429462] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.433844] pci 0000:00:1f.2: reg 0x20: [io 0x6100-0x611f]
[ 0.437198] pci 0000:00:1f.2: reg 0x24: [mem 0xc0840000-0xc0840fff]
[ 0.440353] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.444325] pci 0000:00:1f.3: reg 0x20: [io 0x6080-0x60bf]
[ 0.447560] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.449892] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.451416] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.452780] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.452871] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[ 0.454735] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[ 0.456248] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.457864] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.459381] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[ 0.460818] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[ 0.462793] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[ 0.464308] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[ 0.465896] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[ 0.467330] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[ 0.469048] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[ 0.470481] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[ 0.473009] iommu: Default domain type: Translated
[ 0.474246] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.475909] SCSI subsystem initialized
[ 0.476854] pps_core: LinuxPPS API ver. 1 registered
[ 0.476854] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.476854] PTP clock support registered
[ 0.482871] Registered efivars operations
[ 0.484649] PCI: Using ACPI for IRQ routing
[ 0.617795] clocksource: Switched to clocksource tsc-early
[ 0.633916] VFS: Disk quotas dquot_6.6.0
[ 0.635036] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.637385] pnp: PnP ACPI init
[ 0.638351] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[ 0.640552] pnp: PnP ACPI: found 5 devices
[ 0.659797] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.662214] NET: Registered PF_INET protocol family
[ 0.667608] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.671276] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.674189] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.678249] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.682476] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.684435] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.687488] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.689866] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.691732] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.693083] NET: Registered PF_XDP protocol family
[ 0.694494] pci 0000:00:02.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ 0.696991] pci 0000:00:08.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ 0.699424] pci 0000:00:02.0: BAR 6: assigned [mem 0x80000000-0x8003ffff pref]
[ 0.701168] pci 0000:00:08.0: BAR 6: assigned [mem 0x80040000-0x8007ffff pref]
[ 0.703441] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.705220] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.706744] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.708676] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
[ 0.710434] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[ 0.712057] pci_bus 0000:00: resource 9 [mem 0x800000000-0xfffffffff window]
[ 0.714493] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[ 0.716779] PCI: CLS 0 bytes, default 64
[ 0.718706] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.719771] Unpacking initramfs...
[ 0.722784] software IO TLB: mapped [mem 0x0000000077f1e000-0x000000007bf1e000] (64MB)
[ 0.728157] Initialise system trusted keyrings
[ 0.730178] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 0.733168] zbud: loaded
[ 0.734053] Key type asymmetric registered
[ 0.735117] Asymmetric key parser 'x509' registered
[ 0.736411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.738899] io scheduler mq-deadline registered
[ 0.740141] io scheduler kyber registered
[ 0.741363] io scheduler bfq registered
[ 0.744517] ERST DBG: ERST support is disabled.
[ 0.746764] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[ 0.749668] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[ 0.754250] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[ 0.764630] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.766798] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.772027] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.773809] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[ 0.776342] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 0.779032] ahci 0000:00:1f.2: flags: 64bit ncq only
[ 0.785458] scsi host0: ahci
[ 0.787802] scsi host1: ahci
[ 0.789649] scsi host2: ahci
[ 0.791419] scsi host3: ahci
[ 0.792989] scsi host4: ahci
[ 0.795102] scsi host5: ahci
[ 0.796332] ata1: SATA max UDMA/133 abar m4096@0xc0840000 port 0xc0840100 irq 24
[ 0.798485] ata2: SATA max UDMA/133 abar m4096@0xc0840000 port 0xc0840180 irq 24
[ 0.800526] ata3: SATA max UDMA/133 abar m4096@0xc0840000 port 0xc0840200 irq 24
[ 0.802461] ata4: SATA max UDMA/133 abar m4096@0xc0840000 port 0xc0840280 irq 24
[ 0.804512] ata5: SATA max UDMA/133 abar m4096@0xc0840000 port 0xc0840300 irq 24
[ 0.806498] ata6: SATA max UDMA/133 abar m4096@0xc0840000 port 0xc0840380 irq 24
[ 0.809286] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.814159] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.815493] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.817184] rtc_cmos 00:03: RTC can wake from S4
[ 0.820075] rtc_cmos 00:03: registered as rtc0
[ 0.821597] rtc_cmos 00:03: setting system clock to 2023-04-03T15:14:12 UTC (1680534852)
[ 0.823898] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.826035] intel_pstate: CPU model not supported
[ 0.827805] gre: GRE over IPv4 demultiplexor driver
[ 0.830099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.830230] Key type dns_resolver registered
[ 0.834317] IPI shorthand broadcast: enabled
[ 0.835504] sched_clock: Marking stable (917320000, -87219984)->(840292103, -10192087)
[ 0.838480] registered taskstats version 1
[ 0.839672] Loading compiled-in X.509 certificates
[ 0.866933] Freeing initrd memory: 6648K
[ 0.873590] Loaded X.509 cert 'Build time autogenerated kernel key: 33fda021901a1d06bbd8fe144904430a8c07ae33'
[ 0.877143] zswap: loaded using pool lzo/zbud
[ 0.880042] Key type .fscrypt registered
[ 0.880972] Key type fscrypt-provisioning registered
[ 1.140540] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.146349] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.150092] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.154769] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.158215] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.161548] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.164212] ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.166357] ata1.00: applying bridge limits
[ 1.168591] ata1.00: configured for UDMA/100
[ 1.171578] scsi 0:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.177181] Freeing unused kernel image (initmem) memory: 1816K
[ 1.216390] Write protecting the kernel read-only data: 16384k
[ 1.224341] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.229988] Freeing unused kernel image (rodata/data gap) memory: 1084K
[ 1.233817] rodata_test: all tests were successful
[ 1.237088] Run /init as init process
[ 1.252286] Alpine Init 3.6.2-r0
Alpine Init 3.6.2-r0
[ 1.254368] Loading boot drivers...
* Loading boot drivers: [ 1.268916] loop: module loaded
[ 1.271911] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.284643] ACPI: bus type USB registered
[ 1.285697] usbcore: registered new interface driver usbfs
[ 1.287278] usbcore: registered new interface driver hub
[ 1.288715] usbcore: registered new device driver usb
[ 1.292423] usbcore: registered new interface driver usb-storage
[ 1.334902] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 1.353592] simple-framebuffer simple-framebuffer.0: [drm] drm_plane_enable_fb_damage_clips() not called
[ 1.362140] Console: switching to colour frame buffer device 160x50
[ 1.368864] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 1.417718] Loading boot drivers: ok.
ok.
[ 1.425785] Mounting boot media...
* Mounting boot media: [ 1.520136] xhci_hcd 0000:00:07.0: xHCI Host Controller
[ 1.521496] xhci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 1
[ 1.523842] xhci_hcd 0000:00:07.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[ 1.527859] xhci_hcd 0000:00:07.0: xHCI Host Controller
[ 1.529135] xhci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 2
[ 1.530908] xhci_hcd 0000:00:07.0: Host supports USB 3.0 SuperSpeed
[ 1.533024] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.535023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.537014] usb usb1: Product: xHCI Host Controller
[ 1.538203] usb usb1: Manufacturer: Linux 5.15.82-0-virt xhci-hcd
[ 1.539659] usb usb1: SerialNumber: 0000:00:07.0
[ 1.541275] hub 1-0:1.0: USB hub found
[ 1.542445] hub 1-0:1.0: 4 ports detected
[ 1.544696] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.547073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 1.549055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.550829] usb usb2: Product: xHCI Host Controller
[ 1.551926] usb usb2: Manufacturer: Linux 5.15.82-0-virt xhci-hcd
[ 1.553272] usb usb2: SerialNumber: 0000:00:07.0
[ 1.555993] hub 2-0:1.0: USB hub found
[ 1.557719] hub 2-0:1.0: 4 ports detected
[ 1.570864] sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.572954] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.675743] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:05.0/virtio4/input/input3
[ 1.681083] input: QEMU Virtio Mouse as /devices/pci0000:00/0000:00:06.0/virtio5/input/input4
[ 1.693616] scsi host6: Virtio SCSI HBA
[ 1.700071] scsi 6:0:0:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.727598] sr 6:0:0:0: Power-on or device reset occurred
[ 1.729811] sr 6:0:0:0: [sr1] scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray
[ 1.743246] tsc: Refined TSC clocksource calibration: 2304.005 MHz
[ 1.744016] virtio_blk virtio7: [vda] 209715200 512-byte logical blocks (107 GB/100 GiB)
[ 1.745502] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135fca2512, max_idle_ns: 440795302618 ns
[ 1.749452] vda: vda1
[ 1.753711] clocksource: Switched to clocksource tsc
[ 1.877068] EXT4-fs (vda1): INFO: recovery required on readonly filesystem
[ 1.880431] EXT4-fs (vda1): write access will be enabled during recovery
[ 1.891565] EXT4-fs (vda1): recovery complete
[ 1.897175] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.999112] Mounting boot media: ok.
ok.
[ 2.002773] Loading user settings from /media/sr0/alpine.apkovl.tar.gz...
* Loading user settings from /media/sr0/alpine.apkovl.tar.gz: 7 0% 8[0K[ 5.129511] Loading user settings from /media/sr0/alpine.apkovl.tar.gz: ok.
ok.
[ 5.146895] Installing packages to root filesystem...
* Installing packages to root filesystem: (1/98) Installing alpine-baselayout-data (3.2.0-r23)
7 0% 8[0K(2/98) Installing musl (1.2.3-r2)
7 0% 8[0K(3/98) Installing busybox (1.35.0-r17)
7 0% 8[0KExecuting busybox-1.35.0-r17.post-install
(4/98) Installing alpine-baselayout (3.2.0-r23)
7 0% 8[0KExecuting alpine-baselayout-3.2.0-r23.pre-install
7 0% 8[0KExecuting alpine-baselayout-3.2.0-r23.post-install
(5/98) Installing ifupdown-ng (0.12.1-r0)
7 0% 8[0K(6/98) Installing openrc (0.44.10-r7)
7 0% 8[0K7 1% 8[0KExecuting openrc-0.44.10-r7.post-install
(7/98) Installing alpine-conf (3.14.6-r1)
7 1% 8[0K(8/98) Installing ca-certificates-bundle (20220614-r0)
7 1% 8[0K(9/98) Installing libcrypto1.1 (1.1.1s-r0)
7 1% 8[0K7 2% 8[0K7 2% # 8[0K(10/98) Installing libssl1.1 (1.1.1s-r0)
7 2% # 8[0K(11/98) Installing ssl_client (1.35.0-r17)
7 2% # 8[0K(12/98) Installing zlib (1.2.12-r3)
7 2% # 8[0K(13/98) Installing apk-tools (2.12.9-r3)
7 2% # 8[0K(14/98) Installing busybox-suid (1.35.0-r17)
7 2% # 8[0K(15/98) Installing mdev-conf (4.2-r0)
7 2% # 8[0K(16/98) Installing busybox-initscripts (4.2-r0)
7 2% # 8[0KExecuting busybox-initscripts-4.2-r0.post-install
(17/98) Installing scanelf (1.3.4-r0)
7 2% # 8[0K(18/98) Installing musl-utils (1.2.3-r2)
7 2% # 8[0K(19/98) Installing libc-utils (0.7.2-r3)
7 2% # 8[0K(20/98) Installing alpine-keys (2.4-r1)
7 2% # 8[0K(21/98) Installing alpine-base (3.16.3-r0)
7 2% # 8[0K(22/98) Installing ca-certificates (20220614-r0)
7 2% # 8[0K7 3% # 8[0K(23/98) Installing libblkid (2.38-r1)
7 3% # 8[0K(24/98) Installing libsmartcols (2.38-r1)
7 3% # 8[0K(25/98) Installing partx (2.38-r1)
7 3% # 8[0K(26/98) Installing libuuid (2.38-r1)
7 3% # 8[0K(27/98) Installing libfdisk (2.38-r1)
7 3% # 8[0K(28/98) Installing ncurses-terminfo-base (6.3_p20220521-r0)
7 3% # 8[0K(29/98) Installing ncurses-libs (6.3_p20220521-r0)
7 3% # 8[0K(30/98) Installing sfdisk (2.38-r1)
7 3% # 8[0K(31/98) Installing cloud-utils-growpart (0.33-r0)
7 3% # 8[0K(32/98) Installing cni-plugin-flannel (1.0.0-r7)
7 3% # 8[0K7 4% # 8[0K(33/98) Installing cni-plugins (1.1.1-r7)
7 4% # 8[0K7 4% ## 8[0K7 5% ## 8[0K7 6% ## 8[0K7 7% ### 8[0K7 8% ### 8[0K7 9% ### 8[0K7 9% #### 8[0K7 10% #### 8[0K7 11% #### 8[0K7 11% ##### 8[0K7 12% ##### 8[0K7 13% ##### 8[0K7 14% ###### 8[0K7 15% ###### 8[0K7 16% ####### 8[0K7 17% ####### 8[0K(34/98) Installing libseccomp (2.5.2-r1)
7 18% ####### 8[0K(35/98) Installing runc (1.1.4-r2)
7 18% ####### 8[0K7 18% ######## 8[0K7 19% ######## 8[0K7 20% ######### 8[0K(36/98) Installing containerd (1.6.8-r2)
7 20% ######### 8[0K7 21% ######### 8[0K7 22% ######### 8[0K7 22% ########## 8[0K7 23% ########## 8[0K7 24% ########## 8[0K7 25% ########### 8[0K7 26% ########### 8[0K7 27% ############ 8[0K7 28% ############ 8[0K7 29% ############ 8[0K7 29% ############# 8[0K7 30% ############# 8[0K7 31% ############# 8[0K7 31% ############## 8[0K7 32% ############## 8[0K7 33% ############## 8[0K7 34% ############### 8[0K7 35% ############### 8[0K7 36% ############### 8[0K7 36% ################ 8[0K7 37% ################ 8[0K7 38% ################ 8[0K7 38% ################# 8[0K7 39% ################# 8[0K7 40% ################# 8[0K7 41% ################## 8[0K7 42% ################## 8[0K7 43% ################### 8[0K7 44% ################### 8[0K7 45% ################### 8[0K7 45% #################### 8[0K7 46% #################### 8[0K7 47% #################### 8[0K7 48% ##################### 8[0K7 49% ##################### 8[0K7 50% ###################### 8[0K7 51% ###################### 8[0K7 52% ###################### 8[0K(37/98) Installing containerd-openrc (1.6.8-r2)
7 52% ####################### 8[0K(38/98) Installing brotli-libs (1.0.9-r6)
7 52% ####################### 8[0K(39/98) Installing nghttp2-libs (1.47.0-r0)
7 52% ####################### 8[0K(40/98) Installing libcurl (7.83.1-r4)
7 52% ####################### 8[0K(41/98) Installing curl (7.83.1-r4)
7 52% ####################### 8[0K(42/98) Installing device-mapper-libs (2.02.187-r2)
7 53% ####################### 8[0K(43/98) Installing libmnl (1.0.5-r0)
7 53% ####################### 8[0K(44/98) Installing libnftnl (1.2.3-r0)
7 53% ####################### 8[0K(45/98) Installing iptables (1.8.8-r1)
7 53% ####################### 8[0K(46/98) Installing iptables-openrc (1.8.8-r1)
7 53% ####################### 8[0K(47/98) Installing ip6tables (1.8.8-r1)
7 53% ####################### 8[0K(48/98) Installing ip6tables-openrc (1.8.8-r1)
7 53% ####################### 8[0K(49/98) Installing tini-static (0.19.0-r0)
7 53% ####################### 8[0K(50/98) Installing docker-engine (20.10.20-r0)
7 54% ####################### 8[0K7 55% ######################## 8[0K7 56% ######################## 8[0K7 57% ######################### 8[0K7 58% ######################### 8[0K7 59% ######################### 8[0K7 59% ########################## 8[0K7 60% ########################## 8[0K7 61% ########################### 8[0K7 62% ########################### 8[0K7 63% ########################### 8[0K7 64% ############################ 8[0K7 65% ############################ 8[0K7 66% ############################# 8[0K7 67% ############################# 8[0K7 68% ############################## 8[0K7 69% ############################## 8[0K7 70% ############################### 8[0K7 71% ############################### 8[0K7 72% ############################### 8[0K7 73% ################################ 8[0K7 74% ################################ 8[0K7 75% ################################# 8[0K(51/98) Installing docker-openrc (20.10.20-r0)
7 76% ################################# 8[0K(52/98) Installing docker-cli (20.10.20-r0)
7 76% ################################# 8[0K7 77% ################################## 8[0K7 78% ################################## 8[0K7 79% ################################## 8[0K7 80% ################################### 8[0K7 81% ################################### 8[0K7 82% #################################### 8[0K7 83% #################################### 8[0K7 84% ##################################### 8[0K7 85% ##################################### 8[0K7 86% ###################################### 8[0K7 87% ###################################### 8[0K7 88% ###################################### 8[0K7 89% ####################################### 8[0K(53/98) Installing docker (20.10.20-r0)
7 89% ####################################### 8[0KExecuting docker-20.10.20-r0.pre-install
(54/98) Installing libcom_err (1.46.5-r0)
7 89% ####################################### 8[0K(55/98) Installing e2fsprogs-libs (1.46.5-r0)
7 89% ####################################### 8[0K(56/98) Installing e2fsprogs (1.46.5-r0)
7 89% ####################################### 8[0K(57/98) Installing e2fsprogs-extra (1.46.5-r0)
7 90% ####################################### 8[0K(58/98) Installing libmount (2.38-r1)
7 90% ####################################### 8[0K(59/98) Installing fstrim (2.38-r1)
7 90% ####################################### 8[0K(60/98) Installing expat (2.5.0-r0)
7 90% ####################################### 8[0K(61/98) Installing pcre2 (10.40-r0)
7 90% ####################################### 8[0K(62/98) Installing git (2.36.3-r0)
7 90% ####################################### 8[0K7 91% ######################################## 8[0K7 92% ######################################## 8[0K7 93% ######################################## 8[0K7 93% ######################################### 8[0K7 94% ######################################### 8[0K(63/98) Installing popt (1.18-r0)
7 94% ######################################### 8[0K(64/98) Installing logrotate (3.19.0-r3)
7 94% ######################################### 8[0K(65/98) Installing logrotate-openrc (3.19.0-r3)
7 94% ######################################### 8[0K(66/98) Installing lsblk (2.38-r1)
7 94% ######################################### 8[0K(67/98) Installing openssh-keygen (9.0_p1-r2)
7 94% ######################################### 8[0K(68/98) Installing openssh-server-common (9.0_p1-r2)
7 94% ######################################### 8[0K(69/98) Installing linux-pam (1.5.2-r0)
7 94% ######################################### 8[0K(70/98) Installing openssh-server-pam (9.0_p1-r2)
7 94% ######################################### 8[0K(71/98) Installing openssh-sftp-server (9.0_p1-r2)
7 95% ######################################### 8[0K(72/98) Installing openssl (1.1.1s-r0)
7 95% ######################################### 8[0K(73/98) Installing shadow (4.10-r3)
7 95% ######################################### 8[0K7 95% ########################################## 8[0K(74/98) Installing readline (8.1.2-r0)
7 95% ########################################## 8[0K(75/98) Installing socat (1.7.4.3-r0)
7 95% ########################################## 8[0K(76/98) Installing libedit (20210910.3.1-r0)
7 96% ########################################## 8[0K(77/98) Installing openssh-client-common (9.0_p1-r2)
7 96% ########################################## 8[0K(78/98) Installing openssh-client-default (9.0_p1-r2)
7 96% ########################################## 8[0K(79/98) Installing fuse-common (3.11.0-r0)
7 97% ########################################## 8[0K(80/98) Installing fuse-openrc (3.11.0-r0)
7 97% ########################################## 8[0K(81/98) Installing fuse3-libs (3.11.0-r0)
7 97% ########################################## 8[0K(82/98) Installing fuse3 (3.11.0-r0)
7 97% ########################################## 8[0K(83/98) Installing libffi (3.4.2-r1)
7 97% ########################################## 8[0K(84/98) Installing libintl (0.21-r2)
7 97% ########################################## 8[0K(85/98) Installing pcre (8.45-r2)
7 97% ########################################## 8[0K(86/98) Installing glib (2.72.1-r0)
7 97% ########################################## 8[0K7 98% ########################################### 8[0K(87/98) Installing sshfs (3.7.2-r1)
7 98% ########################################### 8[0K(88/98) Installing sudo (1.9.12-r1)
7 98% ########################################### 8[0K7 99% ########################################### 8[0K(89/98) Installing udev-init-scripts (35-r0)
7 99% ########################################### 8[0KExecuting udev-init-scripts-35-r0.post-install
(90/98) Installing udev-init-scripts-openrc (35-r0)
7 99% ########################################### 8[0K(91/98) Installing eudev-libs (3.2.11-r0)
7 99% ########################################### 8[0K(92/98) Installing xz-libs (5.2.5-r1)
7 99% ########################################### 8[0K(93/98) Installing zstd-libs (1.5.2-r1)
7 99% ########################################### 8[0K(94/98) Installing kmod-libs (29-r2)
7 99% ########################################### 8[0K(95/98) Installing eudev (3.2.11-r0)
7 99% ########################################### 8[0K(96/98) Installing eudev-openrc (3.2.11-r0)
7 99% ########################################### 8[0K(97/98) Installing xz (5.2.5-r1)
7 99% ########################################### 8[0K(98/98) Installing zstd (1.5.2-r1)
7 99% ########################################### 8[0K7100% ############################################8[0KExecuting busybox-1.35.0-r17.trigger
Executing ca-certificates-20220614-r0.trigger
Executing eudev-3.2.11-r0.trigger
OK: 312 MiB in 98 packages
[ 8.316844] Installing packages to root filesystem: ok.
ok.
OpenRC 0.44.10 is starting up Linux 5.15.82-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... * /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting modloop ... * Verifying modloop
[ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting efivarfs filesystem ... [ ok ]
* Starting udev ... [ ok ]
* Generating a rule to create a /dev/root symlink ... [ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Checking local filesystems ... [ ok ]
* Remounting filesystems ... [ ok ]
* Generating machine-id ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Mounting cgroup filesystem ... [ ok ]
* /var/log/buildkitd.log: creating file
* Starting Buildkit Daemon ... [ ok ]
[ ok ]
[ ok ]
* Waiting for uevents to be processed ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...udhcpc: started, v1.35.0
udhcpc: broadcasting discover
udhcpc: broadcasting select for 192.168.5.15, server 192.168.5.2
udhcpc: lease of 192.168.5.15 obtained from 192.168.5.2, lease time 86400
[ ok ]
[ ok ]
* Registering QEMU binaries in binfmt misc ... [ ok ]
No user exists for uid 0
* ERROR: sshd failed to start
Welcome to Alpine Linux 3.16
Kernel 5.15.82-0-virt on an x86_64 (/dev/ttyS0)
colima login:
It looks like it is stuck in an unknown state. You can resolve that by forcefully shutting it down.
colima stop -f
It didn't worked. The difference I can see in logs is that
For successful startup we get
* Registering QEMU binaries in binfmt misc ... [ ok ]
* Starting sshd ... [ ok ]
For my failure case, we get the below logs
* Registering QEMU binaries in binfmt misc ... [ ok ]
No user exists for uid 0
* ERROR: sshd failed to start
@abiosoft Do you have any idea why would the error No user exists for uid 0 would come
Can you try with another profile?
# create another profile named 'sample'
colima start sample
If it still fails, can you try starting with --cpu-type host or --cpu-type max?
I encountered this error.
I deleted the default instance and restarted colima start -a x86_64 --cpu 4 --memory 8 --disk 80, it seemed to fix the issue.
But deleting the instance will also wipe out the previous data.
I know that starting from clean slate solves the issue but I lost my local database data.
Hence I was seeking suggestions on how can I recover from that state
On Fri, 12 May 2023 at 8:17 AM, Gayle @.***> wrote:
I encountered this error. I deleted the default instance and restarted colima start -a x86_64 --cpu 4 --memory 8 --disk 80, it seemed to fix the issue.
— Reply to this email directly, view it on GitHub https://github.com/abiosoft/colima/issues/684#issuecomment-1545228327, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAJJ5H7M4RX3NP56EXDQZWDXFXIWDANCNFSM6AAAAAAWRPCGJ4 . You are receiving this because you authored the thread.Message ID: @.***>
-- Regards, Amit Thawait Phone : +91-8080686735
I have a similar issue after upgrading to Ventura, Intel Macbook 2019, colima 0.5.4
rm -rf ~/.lima ~/.colima
doesn't fix it
trying different parameters or colima start doesn't fix it
❯ colima start -v
INFO[0000] starting colima
INFO[0000] runtime: docker
INFO[0000] preparing network ... context=vm
INFO[0000] creating and starting ... context=vm
> Terminal is not available, proceeding without opening an editor
> "Attempting to download the image from \"https://github.com/abiosoft/alpine-lima/releases/download/colima-v0.5.0-2/alpine-lima-clm-3.16.2-x86_64.iso\"" digest="sha512:e9e118498f3a0745574ffc3686105d2c9777f7142164fe50ee47909dabd504c80ac29aeb76f9582706173310d1488d3b6f0ee9018e2a6aadc28eefb7767b63ec"
> Using cache "/Users/framp/Library/Caches/lima/download/by-url-sha256/e1cbaef56fc8e75af106d934389a17618643fcecfa066302d45ffb0390709851/data"
> [hostagent] Starting QEMU (hint: to watch the boot progress, see "/Users/framp/.lima/colima/serial.log")
> SSH Local Port: 55136
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Driver stopped due to error: "exit status 255"
> [hostagent] Shutting down the host agent
> [hostagent] failed to exit SSH master
> [hostagent] Shutting down QEMU with ACPI
> [hostagent] failed to open the QMP socket "/Users/framp/.lima/colima/qmp.sock", forcibly killing QEMU
> [hostagent] failed to kill QEMU
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
> [hostagent] Waiting for the essential requirement 1 of 5: "ssh"
Same issue on 0.5.4. Multiple stops didn't help.
I've updated to 0.5.5 with brew and run:
limactl stop -f colima
colima start --cpu 4 --memory 4 --disk 100 --arch aarch64 --vm-type=vz --vz-rosetta
and that worked. However, I got an EOF after some time the containers were running and after that point nothing worked except deleting the vm. I should add I got into the ssh issue after an EOF in the first place though
Experiencing this same issue after upgrading to Colima 0.5.5 . Starting a new vz vm seems to hang waiting for the ssh port. ~/.lima/colima/serial.log seems to be empty for me.
@abiosoft on an m1 yeah.
ProductName: macOS
ProductVersion: 13.2.1
Posted on a lima issue here too https://github.com/lima-vm/lima/issues/1200#issuecomment-1568669912
@terev you're most likely affected by this https://github.com/lima-vm/lima/issues/1399 which requires an upgrade to macOS 13.3.1 or newer.
@abiosoft Thank you! that was it. Its working now on 13.4. Maybe it could be worth adding something about this to the release notes?
I met the same issue and it was gone after I updated to MacOS 13.5. Thank you so much @abiosoft
Am seeing this after my computer was replaced with one running Ventura; under Monterey it was fine, but with Ventura it has been incredibly unreliable. The OS and all pieces of Colima (via Homebrew) are up to date, starting a project using ddev (a wrapper for Docker containers) results in Colima failing after a while. I've spent so much time debugging it I could have easily paid for a year's subscription to Docker.
@damienmckenna I was able to resolve this doing a factory reset on the instance.
Hello I am observing the same behavior Running Sonoma 14.1
Deleting VM helps, but I can not start existent instance
FWIW I replaced Colima with Orbstack and haven't had any problems since.
I've been having the issue for a while now on macOS 13.6. Colima (and Lima) won't start and no serial logs are captured. For what it's worth, it seems to be happening with limactl as well. Logs are boring and the same as those shown here.
Unlike some others, I have no luck when deleting everything and starting fresh. I just uninstalled colima and lima, cleared out ~/.colima ~/.lima, re-installed them (colima v0.6.1 and lima 0.18.0), and tried to run the default VM and got the same thing.
Running on macOS 13.6 (22G120) on a MBP (15-inch, 2019). I had the same issue with Colima 0.6.2, removing Colima & lima didn't solve my issue. Starting with a fresh instance didn't work The only way to continue using Colima has been to revert to v0.5.6...
Same here. I think I'm experiencing this issue much more often in this release https://github.com/lima-vm/lima/issues/1609 .
@LedzZm go install github.com/abiosoft/colima/cmd/[email protected] was the easiest way I found to install an old version. ~/go/bin would need to be in your path or run it directly, or move it to be in your path, etc.
@LedzZm A change was pushed to lima that helps this boot issue. Try brew install lima --HEAD .
Related QEMU failure and update info in
- https://github.com/abiosoft/colima/issues/705#issuecomment-1826173427
@LedzZm sorry I didn't see your comment until now. If I remember correctly, I had Colima installed with Brew, so I uninstalled it from Brew, then manually installed the older version (downloaded from the releases). Anyway since it was almost 6 months ago, I hope you don't have this issue anymore.