abdullahO2
abdullahO2
@afischerdev I've noticed that the dynamic_range feature works within a range of approximately 20km from the nearest road. Attempting to exceed this range results in a message like "Start marker...
@devemux86 I've tried setting `assign waypointCatchingRange = 3000` in the profile, but it didn't seem to change anything. I tested this with the destination point, and the "Destination marker is...
> @abdullahO2 Do you have some coordinates from your test that we could check against the new lib? https://brouter.de/brouter-test/#map=10/17.8696/46.8004/standard&lonlats=46.895592,17.601443;46.720824,17.530452;46.587524,17.680655
@afischerdev If you tried this, it will not work because it is more than 20 km: https://brouter.de/brouter-test/#map=10/17.8696/46.8004/standard&lonlats=46.895592,17.601443;46.720824,17.530452;46.455709,17.968424
@afischerdev Thank you for the update! I can confirm that the new library resolves the 20km limit issue. However, I've noticed a new, unexpected behavior. When requesting a route to...
@afischerdev I can now provide an example of the new issue I mentioned earlier. With `assign use_dynamic_range = true` in the profile, please see this route: [https://brouter.de/brouter-test/#map=8/20.225/43.671/standard&lonlats=46.720379,22.287226;46.604144,18.122351](https://brouter.de/brouter-test/#map=8/18.436/45.675/standard&lonlats=46.720379,22.287226;46.604144,18.122351) As you can...
@afischerdev Thank you for the update! Expanding the distance check and marking unreachable points is a good step forward. However, while this solves the 20km limit issue, I've noticed some...
@afischerdev Thank you again for the updates! I've been reviewing the recent changes to `useDynamicRange` and have a suggestion that might further improve its behavior, particularly in cases where closer...
@afischerdev You're very welcome! I appreciate you taking the time to consider the suggestion. I understand that it might not be a straightforward implementation, and I trust your expertise in...
@afischerdev Thank you so much for taking the time to investigate this issue further and for sharing your detailed test results. I really appreciate your dedication to finding a solution...