aaronw2

Not booting from SD card

6

I am attempting to upgrade U-Boot on my board but there is no output after it starts. I did change v2024.01 instead of the release candidate. DDR 9fffbe1e78 cym 24/02/04-10:09:20,fwver:...

OAUTH2 not supported

1

My organization now requires oauth2 for logging in with 2 factor authentication via phone push notifications. This requires that a web browser open a page to handle this and this...

Need interrupt pin for I2C

1

It seems that for reliable i2c support the interrupt pin should be checked before accessing it. This is what the SparkFun BNO085 library does. Failure to check this may result...

No PCIe on Orange Pi 5 Plus

9

I installed the official 2024.07 release (1.1) and do not see my NVME device nor are any Ethernet devices visible. The pci command says there is no such bus. This...

SERIAL_TX_BUFFER_SIZE/SERIAL_RX_BUFFER_SIZE are not defined

1

### Board custom esp32s3 board ### Device Description Custom board with ESP32S3 and FUSB302 chip connected to USB-C port. The problem is unrelated to the board. ### Hardware Configuration ESP32S3...