Lodewijk

[analyse_20220918_2146.zip](https://github.com/merbanan/rtl_433/files/9595175/analyse_20220918_2146.zip) Hi, in this example the pressure - start with 1,65 bar - after ~4-8 sec drops to 0,86 bar - after 2 sec drops to 0,62 bar - after...

@franki29 only from 1 sensor

I've also made a dump of the second sensor. I only have two sensors because I'm using these sensors for my caravan. Regarding also the yellow label on this second...

@franki29 no silly questions :). But you're right, these sensors are registring both temperature and pressure. The TPMS sensors are during the tests only inside my house. Temperature of a...

> Hi a8193, g005 is again the inFactory-TH Sensor. Try rtl_433 -r g005_433.92M_250k.cu8 I know, this sensor is somewhere in the neighbourhood. How can I ignore this sensor within my...

@franki29 and @zuckschwerdt Every measurement I've been done was always only with one sensor. As said I've only two sensors and the not-used sensor is always wrapped in aluminium foil...

Hi, hereby an additional test for each sensor while decreasing the pressure slowly. ``` test sensor P_bar T_dC P_psi T_dF pck00 pck01 pck02 pck03 pck04 pck05 pck06 pck07 pck08 pck09...

As it seems the Tire Moni sensors have a different dataformat for pressure and for temperature, I've also done some additional testing by only changing the temperature. The initial pressure...

@franki29 I'm afraid your format isn't the right one. In my table you can see there is no direct relation between de values in column T_dC (which are incrementing within...

> Hi Lodewijk, so for me it looks like the second data format that I was looking at might work. At least for the ID , Pressure and Temperature. It...