Andrew Allard

Hi I'm having a similar issue. I traced it down to this section: ```python dta = { # TODO Make this dynamic and read the data from the response one...

@volfco Any update?

Out of curiosity, are you planning to update the OSW hardware at all? From the website it appears there is/was a rev 4 and rev 5 in the works are...

@GreenShadeZhang This project has been quiet for quite some time. As mentioned in #10 I forked this and started a new [revision of the hardware](https://github.com/a-allard/open-smartwatch-gps). I have not yet tested...

@samuk Such a variant looks to be possible. But the FW would require a complete rewrite from the ground up. The FW rewrite is not something I am up for....

2 issues with using the generic Wisblock FP. The display connector is 2.1mm high. The Wisblock connector is only 0.8mm high. So the Wisblock would collide with the display connector...

That might fit with a bit of shoehorning. The GPS will be crazy tight. So all passives will be 0201s for space reasons. So hand assembly will be very difficult...

Alright. I'll have to remember what JLC limitations are. That might be feasible. I don't know enough about how watchy mechanical assembly is designed to give a solid answer. It'll...

@samuk Getting back to looking at this.... It might literally fit....  My only serious concern right now is if manufacturing tolerances stack up the RAK module might not sit...

Sounds good. I'll take a look at the other GPS module probably this weekend. We can do a small header. Or because the wisblock is technically removable we could leave...