Add support for SE2417FS051 4.2" 3 colors (vusion 4.2 bwr GL440 )

[marcteys]

Hi,

I know you are not accepting PR, but i'm pushing it here for others.

Add support for SE2417FS051 , or the screen present in the vusion 4.2 bwr GL440 from imagotag.

Hack from https://hackaday.io/project/191055-magicpaper-a-epaper-kit/log/218909-begin

Pinout in a ESP32 Dev kit

VCC -> 3.3V (Power positive - 3.3V power supply input) GND -> GND (Ground) DIN -> P14 (GPIO 14, HSPI MOSI - data input) SCLK -> P13 (GPIO 13, HSPI SCK - clock signal input) CS -> P15 (GPIO 15, Chip selection, low active) DC -> P27 (GPIO 27, Data/Command control) RST -> P26 (GPIO 26, Reset, low active) BUSY -> P25 (GPIO 25, Busy status output)