Yuzuki2040

A dev board based on RaspberryPi RP2040 MCU

Development board based on Raspberry Pi RP2040 MCU design.

iBom: https://yuzukihd.gloomyghost.com/Yuzuki2040/

Update log

• 1.4-Successful verification
  • Fix Type C interface CC error
  • Add GPIO
  • Delete islands
  • Optimize the wiring structure
• 1.3-Verification succeeded
  • Add RESET button
• 1.2-Verification succeeded
  • Add CH340N as the onboard UART conversion chip to facilitate the development of MicroPython etc.
  • Add power protection reverse connection protection
  • Add Micro USB interface as serial output
• 1.1-Verification succeeded
  • Fix 3V3 and 1V1 circuit drawing error causing chip burn problem
  • Add test pins
• 1.0-Verification failed
  • Add Arduino style board
  • Complete circuit diagram drawing
  • Complete PCB drawing

Official information and documents

• https://www.raspberrypi.org/products/raspberry-pi-pico/
• https://www.raspberrypi.org/documentation/rp2040/getting-started/

基于树莓派RP2040 MCU设计的开发板。

更新日志

• 1.4 - 验证成功
  • 修复Type C接口CC错误
  • 增加GPIO引出
  • 删除孤岛
  • 优化布线结构
• 1.3 - 验证成功
  • 增加RESET按钮
• 1.2 - 验证成功
  • 增加CH340N作为板载UART转换芯片，方便MicroPython等开发
  • 增加电源保护反接保护
  • 增加Micro USB接口作为串口输出
• 1.1 - 验证成功
  • 修复3V3与1V1电路绘制错误导致芯片烧毁问题
  • 增加测试脚位
• 1.0 - 验证失败
  • 增加Arduino风格板型
  • 完成电路图绘制
  • 完成PCB绘制

官方资料与文档

• https://www.raspberrypi.org/products/raspberry-pi-pico/
• https://www.raspberrypi.org/documentation/rp2040/getting-started/