T-PicoC3
T-PicoC3 copied to clipboard
Xinyuan-LilyGO
I tried to boot the board on rp2040 on mac and I found out that using a usb-A to usb-C cable managed to have it boot correctly, once the boot...
Are the GPIO pins GP0-GP11 of the RP2040 accessible on the board? Are the pin numbers on the silkscreen compatible with the RP2040 datasheet? cf: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf page 237
Hi, where can i find the right configuration of TFT_eSPI for T-PicoC3?
Are there any starter guides out there that make sense? Whats written here is of no help at all..i try to understand whats been written, but the text assumes stuff...
Hello, I´ve uploaded a MicroPython bootloader to study using Thonny IDE. That´s Ok and works fine! The problem is: Now i have to use the arduino IDE again, running with...
In arduino not able to see serial port, the led light blink in fast pace
I've just received three T-PIcoC3 boards, new from factory. I'm unable to program any of them. When connecting the USB cable, the blue LED blinks quickly. When reversing the cable,...
Hello T-PicoC3 Tutorial for comms between internal RP2040 and ESP RP2040(sender): from machine import UART, Pin import time time.sleep(3) uart = UART(1, baudrate=115200 , tx=Pin(8), rx=Pin(9), cts=Pin(10), rts=Pin(11)) uart.write('ATE0\r\n') led...
Hi, I am failing to upload to the T Pico with platformio (vscode), on linux (ubuntu 22.04) I use same config as in tutorial ``` [env:pico] platform = https://github.com/maxgerhardt/platform-raspberrypi.git board...
Hello! I would like to know what does PWR_EN do on GPIO22? How did I understand this display power management?  
