T-Impulse
T-Impulse copied to clipboard
Wristband with LoRa and GPS
Hello Everyone, I am trying to establish LoRa communication between [SX1269 915M LoRa HAT](https://www.amazon.com/SX1262-LoRa-HAT-Raspberry-Communication/dp/B0822Z3CX8/ref=asc_df_B0822Z3CX8/?tag=hyprod-20&linkCode=df0&hvadid=675689844684&hvpos=&hvnetw=g&hvrand=6525117258116296802&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1018127&hvtargid=pla-1894173517841&psc=1&mcid=0abcb456ba60393787c74434607371d1&gad_source=1) and[ T-Impulse Wristband](https://www.lilygo.cc/products/t-impulse-lora-wristband). There is LoRa Transmitter and Receiver function in T-Impulse Wristband(wristband) I am trying...
I am trying to flash SoftRf to the T-Impulse. With the information I found so far, I thought this would be the command: `dfu-util -a 0 -s 0x08000000 -R -D...
There is no schematic or pin mapping for the variant with ICM2094 IMU. I wonder if the IMU can be used to wake the device from sleep via the interrupt...
I'm having trouble getting my T-Impulse to enter DFU mode. I think I might have a malfunctioning boot (or reset) button on my T-Impulse which is causing issues. What should...
Hello Lilygo People! I just bought a Lilygo T-Impulse and I have issues uploading the sketch via the Arduino IDE. I can serial monitor the T-Impulse and the USB port...
What a waste of money ... The device is a nightmare to program or use and the documentation is even worse Stay clear
I have tested the T-Impulse and got GPS and LoRaWAN working for TTN. However, since a few days I could no longer get a GPS fix. Today, I have found...
Hello Everyone, I am having this problem where my T impulse is only detected using 1 specific USB-C cable. It doesn't even work with the cable provided in the box....
Dear All, I'm trying to identify a way to know when the device is connected on an USB port delivering current. I need to know not only when charging is...
hello, i just bought one s76g and uploaded the code, all is working perfectly except the lora, i cant tx or rx, we need to change something in the config...