LilyGo-LoRa-Series
LilyGo-LoRa-Series copied to clipboard
Xinyuan-LilyGO
LILYGO LoRa Series examples
I would like to use the T3-S3 USB-C port as a USB OTG Host. Data+/Data- appears to have proper communication but +5V is outputting 0V so it cannot power anything......
In the pin diagram, number 27 of mosi, number 5 of sclk, and number 18 of cs are missing. We are suffering because we cannot resolve this. please help 
I'm using T-Beam Supreme (M) board and trying to use the SD card with LoRa but it seems that there is a conflict to the SPI initialization. While the SD.begin()...
I could need some help with LoRa communication between an T-Beam SoftRF SX1626 and a T-Beam Mashtastic. I tried to use the transmitter and receiver code from: https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/tree/master/examples/RadioLibExamples but this...
This component too hot. Battery was plugged in, but switched off.  What it can be and what can I do? // P.S.: gray wire is single tone buzzer, black...
Documentation in the en/LilyGo_LoRa_Series_Quick_Start_On_TTN.md file specifies there is a TTN example in the /LilyGo-LoRa-Series/examples/TTN/TTN_OTTA folder but it looks like its been removed. is there any up to date documentation on...
Please add T3S3 to the supported boards for Arduino-esp32. I've open an issue here: https://github.com/espressif/arduino-esp32/issues/9927
Ranging
Dear LilyGO, I've just ordered two T3-S3 modules. Any advice on implementing range-finding please? Many thanks, Nick
I am having issues even to compile the example code in Arduino as when I execute the code, it goes into a infinite watchdog reset loop. I followed the setup...
Can you upload your own project code to Lilygo TTGO V2.1_1.6 Lora 32 which has paxcounter/ disaster radio default firmware?
