WouterJD
Preinstalled FortiusAnt image for SD-card
I have build an self expanding Raspi Image FortiusAnt6v8.image.zip with FortiusAnt on the new "Bookworm" Raspbian.
It has been shrunk to 2.2GB. I think it is a good solution for somebody with no programming experience.
On this way I build a one key hit installation script for Bookworm. You can find a little description here: Wayland branch: ](https://drive.google.com/file/d/194TR7OpOv9Jgxx4twaCNeuSfxG9rKRHb/view?usp=drive_link) You can download the Script [here].(https://github.com/decodeais/FortiusANT/blob/Wayland/raspberry/FortiusAntInstall.sh)
Compatible Hardware
The image should lead to a functional system on the following Raspi versions:
Raspberry Pi: 3B, 3B+, 3A+, 4B, 400, 5, CM3, CM3+, CM4, CM4S, Zero2W Currently tested on Zero2W and Raspi4B, and Linux Mint.
If you don't like it, see it as a suggestion.
Hello. Thank you for the script. It helped me set up FortiusANT on my RPI3. Unfortunately, I encountered issues when trying to use the image.
What kind of issues? If you want to start the program you have only to use the Linux Startmenue. It is configured for the Fortius-Trainer.
Welcome to the FortiusANT community @VUTSHYK !
I'm always curious to know who I communicate with, where FortiusANT is used and what configuration is used. Please tell me what bundle did you buy, and what brake and what head unit do you use? I would therefore appreciate that you introduce yourself; perhaps leave a comment under issue #14. You could also consider to visit the sponsor page
I hope you will get the trainer working!
Hi! Bought a 3.5 LCD but when installing driver i end up with a white screen. Followed induktions both from https://github.com/goodtft/LCD-show.git and some other guys fix on the goodtft drivers. But i still end up with a white screen. Rpi is working but i have to connect it thru ssh. Any thoughts? As i understand bookworm isn't supported, but is there a fix? /Carl
Hei @Carlin75 great to read that you're experimenting with LCD's. What I would suggest is to start with the basics to get the display working and then integrate into FortiusANT.
raspberry.py (module of FortiusAnt) has a built-in main() for test-purpose, and that might be a starter
It seems like your image is corrupted. The raspberry pi boots after busybox. I've tried several SD cards and power supplies, each with etcher and rufus.
