Wouter1

remove syncer?

5

The mSyncer is deprecated by Apple. Maybe we can find a different way to do this

control panel crashing

8

Tom reports in #40 that the control panel is crashing sometimes THis happens when using driver 3.5.1 and changing the rate from reaper

put control panel in PreferencePanes

2

I'd like to put the PreferencePane into the //System/Library/PreferencePanes However nothign happens if I put it there

Maybe I can make a topic how to make the highest quality recording ``` volumes to 1.0 (clipping can never be avoided with soft volume, you only loose resolution) use...

hf noise in output at 176 and 196kHz

35

TomDrinkwater reported (see #40 ) there is a nasty noise on the output at 192 and 176k sample rates. It is 40dB below full scale, and inaudible (presumably) due to...

raised noise level on main out if no headphone attached

2

It seems that the noise level on the main output is lower if a headphone is attached.

restructure audio output code

5

I'd like to move all audio output stream related code to the USBOutputStream class that I created already

phase inversion

33

TomDrinkwater reported that the phase is being reversed in a roundtrip test connecting output directly to input.

Sometimes the playback seems to go at the wrong speed. Usually when I play back a 440Hz sample tone from Mathematica one time the speed was roughly doubled, but not...

attempting to clip to a position more than one buffer ahead of last clip position

1

Sometimes I see this ``` Jan 26 20:40:16 vlieland kernel[0]: IOAudioStream[0xffffff80441d1000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (54,814)->(55,fd5). Jan...