WIZ750SR
WIZ750SR copied to clipboard
Wiznet
WIZnet Serial to Ethernet(S2E) module based on W7500 chip, WIZ107/108SR S2E compatible device
The generated hostname in dhcp.c is wrong formatted. The MAC-address bytes where inserted as binary values instead of a valid string format (ASCII). The #define 'DCHP_HOST_NAME' was changed to "WIZ750SR-\0"...
WIZ750SR-485 uses 2-Wire method among RS-485 wiring methods. That's why you only need to activate the port when sending data. Because this part was missing, the transmission of the command...
Serial baud rate 460800 Operation check for speed is required.
The Vendor Class Identifier is a constant string that identifies the kind of hardware that asks the DHCP server for a IP address. The ID is passed via the option...
image
 
Hi. I am not able to get a Size serial data packing condition working when on 1toN UDP mode. When working with 1to1 UDP all conditions works great. But when...
I think the W7500P is better. I hope this project can also have modbus and Mqtt as well as the wiz550s2e project.
I understand the EVB board switch "HW_TRIG" makes possible to boot the WIZ750SR in AT Mode or GW mode, is this correct? I have updated to v 1.2.4 and it...
