QinZijie

遥控器试飞一切正常，编译结束后upload反复插拔仍然识别不到BootLoader

1

在进行硬件在环仿真时（Pixhawk2.4.8），按照流程配置，遥控器试飞，均正常， 但使用simulink编译成功，进行PX4Upload时，反复插拔多次仍然无反应。是否有解决方案 Loaded firmware for 9,0, size: 1481421 bytes, waiting for the bootloader... If the board does not respond within 1-2 seconds, unplug and re-plug the USB connector. Attempting reboot...