DooMini

[TigranDesigner]

• [x ] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to printer_mods/, firmware configurations go to firmware_configurations/, slicer profiles go to slicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
• [x ] Folder and file naming:
  • Folders and filenames shouldn't contain spaces. Only letters a-zA-Z, numbers 0-9, underscores _, hyphens - and periods .
  • Primary color: part_xyz.stl
  • Accent color: [a]_part_xyz.stl
  • Opaque color (Blocks light): [o]_part_xyz.stl
  • Clear/transparent color (Allows light): [c]_part_xyz.stl
  • Quantity, if more than one is needed: part_xyz_x4.stl
• [ x] For each mod, add a small README.md file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.
• [x ] The PR modifies the top-level README.md of the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with.
• [ x] The mod/configuration/profile has been tested by the person submitting the mod and/or other Voron users. Make sure to add information about how the mod was tested below.
• [x ] The mod is not merely a slight modification of an official Voron part, configuration or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile which only modifies a few values). (When in doubt, contact one of the admins in the Voron discord before submitting the PR)
• [ x] Submitted STLs are printable without support. (If the mod does not meet this criterion join the Voron discord and ask the other users for advice on how to modify the mod such that it does not require supports)
• [x ] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)
• [ x] Submitted STL files are oriented and scaled properly for printing.
• [ x] Submission includes a CAD file in the form of a .STEP or .SCAD file
• [ x] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

How was it tested?

Tested by Beta testers from the DoomCube community ( Doom-v0) At least 4 DooMinis have been printed so far.

Any background context you want to provide?

New enclosure all printed parts.

Screenshots (if appropriate)

Manual and photos are included in the repository

Further notes

[bdbell]

Thanks for your submission. The usable files like STLs, photos, and manual should not be in archive files like rar but should be individually uploaded. The cad files can be archived but should be in a more common format like zip.

[TigranDesigner]

Hi

Thank you for taking your time and sending me a reply. Shall I delete and make a new Branch , or modify the existing one .

Regards Tigran Kostandyan

On Sun, Aug 28, 2022, 10:03 AM 120decibell @.***> wrote:

Thanks for your submission. The usable files like STLs, photos, and manual should not be in archive files like rar but should be individually uploaded. The cad files can be archived but should be in a more common format like zip.

— Reply to this email directly, view it on GitHub https://github.com/VoronDesign/VoronUsers/pull/803#issuecomment-1229465044, or unsubscribe https://github.com/notifications/unsubscribe-auth/AXEA4OM6NREWC7OBC3VBOSLV3NWUFANCNFSM572NUYPA . You are receiving this because you authored the thread.Message ID: @.***>

[MapleLeafMakers]

You can modify the existing branch

[MapleLeafMakers]

the DooMini folder needs to be moved inside another folder with your username.

[MapleLeafMakers]

There's an extra ZooMini folder in printer_mods, along with a duplicate readme.md

[TigranDesigner]

Yeah .. that's me being a noob. I will remove that before my next pull request.

Thank you for your time

Tigran

On Sun, Aug 28, 2022, 11:20 PM Maple Leaf Makers @.***> wrote:

There's an extra ZooMini folder in printer_mods, along with a duplicate readme.md

— Reply to this email directly, view it on GitHub https://github.com/VoronDesign/VoronUsers/pull/803#issuecomment-1229707614, or unsubscribe https://github.com/notifications/unsubscribe-auth/AXEA4OLOPGGKZN2MD3ODMBLV3QUAZANCNFSM572NUYPA . You are receiving this because you authored the thread.Message ID: @.***>

[FHeilmann]

Closing due to lack of activity. It seems resubmitting this PR from scratch is the best course of action.