Added Voron SW SB CR Touch (No Tools) Mod

[prasadp4009]

• [x] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to printer_mods/, firmware configurations go to firmware_configurations/, slicer profiles go to slicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
• [x] Folder and file naming:
  • Folders and filenames shouldn't contain spaces. Only letters a-zA-Z, numbers 0-9, underscores _, hyphens - and periods .
  • Primary color: part_xyz.stl
  • Accent color: [a]_part_xyz.stl
  • Opaque color (Blocks light): [o]_part_xyz.stl
  • Clear/transparent color (Allows light): [c]_part_xyz.stl
  • Quantity, if more than one is needed: part_xyz_x4.stl
• [x] For each mod, add a small README.md file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.
• [x] The PR modifies the top-level README.md of the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with.
• [x] The mod/configuration/profile has been tested by the person submitting the mod and/or other Voron users. Make sure to add information about how the mod was tested below.
• [x] The mod is not merely a slight modification of an official Voron part, configuration or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile which only modifies a few values). (When in doubt, contact one of the admins in the Voron discord before submitting the PR)
• [x] Submitted STLs are printable without support. (If the mod does not meet this criterion join the Voron discord and ask the other users for advice on how to modify the mod such that it does not require supports)
• [x] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)
• [x] Submitted STL files are oriented and scaled properly for printing.
• [x] Submission includes a CAD file in the form of a .STEP or .SCAD file
• [x] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

CR Touch Mod for Voron SwitchWire with Stealtburner (Modded the rail mount with press fit CR Touch)

How was it tested?

Built Voron Swithcwire (EnderWire) with the Mod

Any background context you want to provide?

Wanted to reuse CR Touch in place of probe in SB rail mount

Screenshots (if appropriate)

https://www.reddit.com/r/voroncorexy/comments/whicbz/serial_request_voron_switchwire_enderwire/?utm_source=share&utm_medium=web2x&context=3

Further notes

[cbc02009]

Looks like this has some merge conflicts that need fixing before it can be added to the repo. Let us know if you're not sure how to fix it and we can walk you through it.

[prasadp4009]

Is there anything I need to do on my end?

[cbc02009]

Yes, there are merge conflicts in the main readme file that need fixing.

[prasadp4009]

Fixed the README.md

[prasadp4009]

Is there anything left?

[cbc02009]

Sorry, I screwed up the order I merged the mods in, and now the printer/readme.md needs to be fixed again. Once that's fixed I can merge it in.

[prasadp4009]

Fixed the README.md Request to merge.

[prasadp4009]

Is there anymore change needed?

[prasadp4009]

Sorry, I screwed up the order I merged the mods in, and now the printer/readme.md needs to be fixed again. Once that's fixed I can merge it in.

Done. You should be able to merge it.

[prasadp4009]

@cbc02009 Can you please review? Thanks!