wrong STL file for 2.4R2 Pinned version in Voron2.4_Y_Endstop_Relocation

[Blinker73]

Hello,

I wanted to use 2 mods from hartk1213 that change the A motor bracket on a V2.4R2

Pins Mod https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod Y endstop Mod https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation

My PIF provider pointed out a mismatch between both sides of the A motor frame.

As per the links in the Y mod's page, I had provided him these files The upper part from the Y endstop mod (File with off centered hole) https://github.com/VoronDesign/VoronUsers/blob/master/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/STLs/Gantry/AB_Drive_Units/a_drive_frame_upper_with_jst_y_endstop_pinned.stl The lower part from the Pins mod https://github.com/VoronDesign/VoronUsers/blob/master/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_lower_pinned.stl

It seems the upper part relocates the X bracket screw hole off center while the lower part has no relocation ending up as a half moon hole when the parts are joined. After asking for help on Discord, a user named garbqgebag V2.1135 V0.610 pointed me to the mod's author's GitHub and to this file which resolves the problem. (correct file with centered hole) https://github.com/hartk1213/MISC/blob/main/Voron%20Mods/Voron%202/2.4/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/a_drive_frame_upper_with_jst_y_endstop_pinned24r2.stl

Can we include the correct file in the Y mod's git page.

Also, it seems the non pinned version also has the issue of the off center hole but don't know where to find a proper unpinned file for the 2.4r2

At the top is what can be downloaded now. at the bottom is what it should look like (red arrow)

Thanks

[MapleLeafMakers]

@hartk1213 any chance you can open a PR with that change?

[hartk1213]

@hartk1213 any chance you can open a PR with that change?

Yeah not at home currently can when I get home in a few days

[bassco]

for reference: https://github.com/VoronDesign/VoronUsers/pull/817 has the corrected files

[hartk1213]

@MapleLeafMakers PR with the files to resolve this issue has been made should we close this issue or wait until the PR is merged?

[newphreak]

I think as long as it's linked like it gets when mentioned, it can be closed automatically when merged.

ons. 21. sep. 2022 kl. 19:24 skrev hart @.***>:

@MapleLeafMakers https://github.com/MapleLeafMakers PR with the files to resolve this issue has been made should we close this issue or wait until the PR is merged?

— Reply to this email directly, view it on GitHub https://github.com/VoronDesign/VoronUsers/issues/782#issuecomment-1254008508, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAE4KH5FGUEHSW2IGOE3SXTV7NAFNANCNFSM55ZE3ELQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

-- Mvh Jon Nilssen