Revo Nozzle in-skirt container for the Voron 2.4 all Sizes

[DatenThielt]

• [x] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to printer_mods/, firmware configurations go to firmware_configurations/, slicer profiles go to slicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
• [x] Folders names MUST NOT contain spaces. If possible, make sure file names also do not contain any spaces.
• [x] For each mod, add a small README.md file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.
• [x] The PR modifies the top-level README.md of the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with.
• [x] The mod/configuration/profile has been tested by the person submitting the mod and/or other Voron users. Make sure to add information about how the mod was tested below.
• [x] The mod is not merely a slight modification of an official Voron part, configuration or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile which only modifies a few values). (When in doubt, contact one of the admins in the Voron discord before submitting the PR)
• [x] Submitted STLs are printable without support. (If the mod does not meet this criterion join the Voron discord and ask the other users for advice on how to modify the mod such that it does not require supports)
• [x] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)
• [x] Submitted STL files are oriented and scaled properly for printing.
• [x] Submission includes a CAD file in the form of a .STEP or .SCAD file
• [x] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

A RevoNozzle in-skirt containe end container that is inserted into the side of a skirt. Designed for the 2.4 250-350 Varients.

How was it tested?

All parts have been printed and tested

Any background context you want to provide?

My hot ends were roaming around in a box and getting lost, I saw the mod by @Andre#7463 (So I says) On discord for the trident and asked if I could remix it, But ended up being a full re-design as you cant put horizontal axels on a 2.4 skirt.

Screenshots (if appropriate)

Further notes

[cbc02009]

TODO: check STLs

[DatenThielt]

Fixed, sorry about that!

[MapleLeafMakers]

There are 2 .step files included here, v8 looks like the correct one, v11 only has the skirt part. can v11 be deleted?

[DatenThielt]

Both were incorrect and I have now uploaded the matching .step to the STL files including the missing doors

[MapleLeafMakers]

Can you rename the step file to replace the spaces with underscores? Revo Nozzle v12.step -> Revo_Nozzle_v12.step

[DatenThielt]

Moved the CAD folder to the correct place, Renamed the step file and fixed the Typo sorry!

[MapleLeafMakers]

LGTM