SexBolt Z endstop adapted for Mandala Rose Works kinematic bed mounts

[azoner]

• [x] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to printer_mods/, firmware configurations go to firmware_configurations/, slicer profiles go to slicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
• [x] Folders names MUST NOT contain spaces. If possible, make sure file names also do not contain any spaces.
• [x] For each mod, add a small README.md file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.
• [x] The PR modifies the top-level README.md of the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with.
• [x] The mod/configuration/profile has been tested by the person submitting the mod and/or other Voron users. Make sure to add information about how the mod was tested below.
• [x] The mod is not merely a slight modification of an official Voron part, configuration or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile which only modifies a few values). (When in doubt, contact one of the admins in the Voron discord before submitting the PR)
• [x] Submitted STLs are printable without support. (If the mod does not meet this criterion join the Voron discord and ask the other users for advice on how to modify the mod such that it does not require supports)
• [x] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)
• [x] Submitted STL files are oriented and scaled properly for printing.
• [x] Submission includes a CAD file in the form of a .STEP or .SCAD file
• [x] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

Derivation of the sexbolt z endstop mod to work with the Mandala Rose Works kinematic bed mounts.

How was it tested?

Around 300 hours on V2.3415. No issues with Klicky and auto-z

Any background context you want to provide?

None

Screenshots (if appropriate)

None

Further notes

None

[azoner]

Edited PR comments

[samwiseg0]

👋

I was looking through your submission and noticed a few things.

1. These holes are unsupported. I would suggest you use the circle square method so they print cleanly. More info here

2. Although this is not a large unsupported overhang. You can clean this up but cutting part of the hex and applying a chamfer so it does not print in mid air.

[azoner]

Thanks for the suggestions. I'll work on fixing these issues.

John Holland a @.@.

On Sun, May 15, 2022 at 1:39 PM samwiseg0 @.***> wrote:

👋

I was looking through your submission and noticed a few things.

These holes are unsupported. I would suggest you use the circle square method so they print cleanly. More info here https://hackaday.com/2020/05/17/look-ma-no-support-for-my-floating-holes/ [image: 2022-05-15_13-25] https://user-images.githubusercontent.com/2241731/168486101-0cfa3cc6-090a-452a-91ac-cdebfa18302e.png 2.

Although this is not a large unsupported overhang. You can clean this up but cutting part of the hex and applying a chamfer so it does not print in mid air. [image: 2022-05-15_13-35] https://user-images.githubusercontent.com/2241731/168486237-fe184eae-8482-44e2-88a4-0041218b7fb1.png

— Reply to this email directly, view it on GitHub https://github.com/VoronDesign/VoronUsers/pull/721#issuecomment-1126984707, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAHCZ3CPR43VUAQHTJEY5GLVKEZGBANCNFSM5VMSA4QQ . You are receiving this because you authored the thread.Message ID: @.***>

[MapleLeafMakers]

@azoner are you still planning to continue with this submission?

[FHeilmann]

Since the last response from the submitter is more than a year old, I'm closing this for now. if you still wish to pursue this submission, please resubmit it from a freshly updated branch. Feel free to reach out on discord for git-assistance.