Adding V0.1 Mods

[JJShankles]

trafficstars

• [x] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to printer_mods/, firmware configurations go to firmware_configurations/, slicer profiles go to slicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
• [x] Folders names MUST NOT contain spaces. If possible, make sure file names also do not contain any spaces.
• [x] For each mod, add a small README.md file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.
• [x] The PR modifies the top-level README.md of the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with.
• [x] The mod/configuration/profile has been tested by the person submitting the mod and/or other Voron users. Make sure to add information about how the mod was tested below.
• [x] The mod is not merely a slight modification of an official Voron part, configuration or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile which only modifies a few values). (When in doubt, contact one of the admins in the Voron discord before submitting the PR)
• [x] Submitted STLs are printable without support. (If the mod does not meet this criterion join the Voron discord and ask the other users for advice on how to modify the mod such that it does not require supports)
• [x] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)
• [x] Submitted STL files are oriented and scaled properly for printing.
• [x] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

I created a dual color skirt mod for the Voron V0.1. I added angles to the Skirt parts so that with a filament swap you can get a dual color effect. It is similar to an existing mod for the V0, but with the longer legs on the V0.1 the old mod doesn't fit anymore.

I modified another existing mod to add an exhaust fan on the Voron V0.1. The original mod replaced one of the tophat panels, but I made it cover the belts on the back of the printer. This mounts using the holes that would normally hold on the back electronics cover. This exhaust uses a roomba HEPA filter and activated carbon sheets as a filter device.

How was it tested?

I have both of the mods running currently on my printer, and they are working great.

Any background context you want to provide?

Screenshots (if appropriate)

I added several pictures in the commits.

Further notes

[cbc02009]

Still need to look at stl orientation and links.

[MapleLeafMakers]

@JJShankles If you still want these included in the repo, please consider closing this and opening a separate pull request for each mod. It's very difficult for us as volunteers with limited time to review multiple mods in a single pull request.

[cbc02009]

Closing due to inactivity.