Orbitu mount to fit Orbiter 1.5/2.0 on CW1

[Saccco]

• [ x] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to printer_mods/, firmware configurations go to firmware_configurations/, slicer profiles go to slicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
• [ x] Folders names MUST NOT contain spaces. If possible, make sure file names also do not contain any spaces.
• [ x] For each mod, add a small README.md file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.
• [ x] The PR modifies the top-level README.md of the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with.
• [ x] The mod/configuration/profile has been tested by the person submitting the mod and/or other Voron users. Make sure to add information about how the mod was tested below.
• [ x] The mod is not merely a slight modification of an official Voron part, configuration or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile which only modifies a few values). (When in doubt, contact one of the admins in the Voron discord before submitting the PR)
• [ x] Submitted STLs are printable without support. (If the mod does not meet this criterion join the Voron discord and ask the other users for advice on how to modify the mod such that it does not require supports)
• [ x] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)
• [ x] Submitted STL files are oriented and scaled properly for printing.
• [ x] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

Orbitu mount

How was it tested?

Printed, installed, working.

Any background context you want to provide?

Wanted to use the new Orbiter but loved the looks of the SB.

Screenshots (if appropriate)

Are in the folder.

Further notes

No.

[cbc02009]

I know you specifically mention CW1 in the PR, but your pictures have stealthburner, which is still in beta, and we're not accepting any mods for beta projects to avoid confusion.

[Saccco]

I know you specifically mention CW1 in the PR, but your pictures have stealthburner, which is still in beta, and we're not accepting any mods for beta projects to avoid confusion.

After reading the beta rules I was sure I get this response. PR was issued before reading the beta. Fair and totally reasonable and acceptable! THX :)

[jtrmal]

Would be nice to incorporate Robert's idea about active cooling (https://orbiterprojects.com/turbiter/) Perhaps not Turbiter itself, but the idea...

[Saccco]

Would be nice to incorporate Robert's idea about active cooling (https://orbiterprojects.com/turbiter/) Perhaps not Turbiter itself, but the idea...

It may happen after the cad is relased.

[FHeilmann]

As this PR has been sitting for some time now, waiting for progress in the turbiter project, I'm closing this particular PR for now. This is mostly due to the fact that due to its age it will be difficult to reconcile this PR with the current master. If you still wish to submit this mod, please open a fresh PR from an updated branch.